498216
9
Zoom out
Zoom in
Previous page
1/24
Next page
9
The Controls - All Models
Selecting the
required Heat
Switch Setting
Starting the Dryer
Empty Water Light
The ‘Cool Tumble’
phase
To select high heat (Cottons), the heat selection switch must be In.
To select Low heat (Acrylics and Synthetics), the heat selection switch
must be Out. See section “Guide to Drying Times”.
Press and release the START Drying button to commence a drying
programme (or delayed start programme on Excel models). The door
must have been securely closed first.
After releasing the start button, it will return to its original position.
This light will glow when the water container is full.
You should not wait for this light to glow before emptying the
container, but empty it after each load (See section “Emptying the
Water Container”).
NOTE: If the light glows during a programme you must stop the dryer
and empty the water container. If this is not done the timer will
advance to the Cool Tumble phase without drying the load.
The light will take approximately 10 seconds to go out after replacing
the empty container.
About 10 minutes before the programme is completed, the heating
elements will be switched off and the programme enters the final
‘Cool Tumble’ phase. During this period, the fabric is cooled. You
should always allow the dryer to complete this phase.
By opening the door you can check the dryness of the load as often
as you wish, and if you want to remove some items before they are
fully dry. (This is particularly useful for a mixed load, where you want
to iron some items but others are to be fully dried). You will need to
press the start button after closing the door to restart the
programme. See section “The Controls”.
NOTE: If the door is opened during a programme, the dryer
will automatically stop.
To continue the programme after closing the door, the
START button must be pressed again.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creda T620CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creda T620CW in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info