498201
9
Zoom out
Zoom in
Previous page
1/24
Next page
Fitting the Door Panel and Plinth...
Mounting parts onto the face of the appliance:
-
Mount the hinge supports onto the face of the machine, positioning the hole indicated by
the arrow, in Fig.1, towards the inside of the face and using the type C screws.
- Mount the magnetic plate on the opposite side, at the top, using the two type B screws.
- Place the spacer illustrated in Fig 4/B between the machine front and the magnet receiver.
Using the drilling template:-
Proceed as follows when applying the panel to the appliance:
- To trace the positions of the holes on the left hand side of the panel, align the drilling
template to the top left side of the panel, using the lines traced on the extremities as a
reference.
- To trace the positions of the holes on the right hand side of the panel, align the drilling
template to the top right side of the panel.
- Use an appropriately sized router to mill the holes for the two hinges, the rubber plug and
the magnet.
Mounting the parts onto the wooden door panel:-
- Insert the hinges into the holes (NB. the movable part of the hinge must be positioned
facing away from the panel) and fasten them with the 4 type A screws.
- Insert the magnet into the top hole on the opposite side of the hinges and fasten it with
the 2 type B screws.
- Insert the rubber plug into the bottom hole.
- The panel is now ready to be mounted onto the machine.
Mounting the panel onto the machine:-
- Insert the nib of the hinge (indicated by the arrow in Fig.2) into the hole for the hinge and
push the panel towards the front of the machine. Fasten the two hinges with the type D
screws.
Fastening the plinth guide:-
If the machine is installed at the end of a set of modular cabinets, mount either one or both of
the guides for the base moulding (as shown, Fig.6).
Adjust them for depth, based on the position of the base moulding and if necessary fasten the
base to the guides (Fig.7).
This is how to assemble the plinth guide (Fig.6).
- Fasten angle P using screw R, insert plinth guide Q into the special slot and once it is in the
desired position, lock it in place using angle P and screw R.
9
Fig.6
Fig.7
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creda IWM1 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creda IWM1 2 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info