498202
11
Zoom out
Zoom in
Previous page
1/24
Next page
11
vii. Levelling...
Adjust the feet until all four feet are in firm contact with the floor ensuring the
appliance stands level in every direction. You can check this using a spirit level.
We recommend you level the appliance to prevent vibration being transmitted to
the surrounding furniture, check that the sides and the top of the appliance are
unable to touch the furniture.
Accessories provided for height adjustment
The following can be found inside the polystyrene lid (Fig.10):
2 x crossbars (G)
1 x strip (M)
The following can be found inside the appliance drum:
4 x adjustable feet (H)
4 x screws (I)
4 x screws (R)
4 x nuts (L)
2 x plinth guides (Q)
Adjusting the appliance height
The height can be adjusted (from 815mm to 835mm), by turning the 4 feet.
Should you require the appliance be placed higher than the above height you
need the following accessories to raise it up to 870mm:
- the 2 x crossbars (G)
- the 4 x adjustable feet (H)
- the 4 x screws (I)
- the 4 x nuts (L)
Then carry out the following steps (Fig.11):
Remove the 4 original feet, place a crossbar G at the front of the machine, fasten
it in place using screws I (screwing them in where the original feet were) then
insert the new feet H.
Repeat at the back of the appliance.
Now adjust the feet H to raise or lower the appliance from 835mm to 870mm.
Once you have reached the desired height lock the nuts L onto the crossbar G.
To adjust the appliance to a height between 870mm and 900mm you need to
mount strip M, adjusting feet H to the required height.
Insert strip M as follows: Loosen the three screws N situated at the front of the
top cover of the appliance, insert strip M as shown in Fig.12, then fasten screws
N.
Fig. 10
Fig. 11
Fig. 12
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creda IWD1 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creda IWD1 2 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info