651217
47
Zoom out
Zoom in
Previous page
1/49
Next page
Note
If Dolby Digital Live or DTSConnect is enabled, only PCM audio and certain compressed audio (for
example, MP3) can be played, which will be encoded by Dolby Digital Live or DTSConnect through
your selected output device.
Problems with Multiple Audio Devices
If there are other audio cards on the system.
You may have an existing audio device installed in your computer. The audio device may be an audio
card or an onboard audio chipset. Before you install your audio device, you are advised to disable or
completely uninstall and remove your existing audio device. Operating multiple audio devices in your
computer may introduce usability issues.
Alternatively, during the installation of your audio card, do the following:
l If your computer detects an installed Sound Blaster Audigy series, Sound Blaster Live! series or
Sound Blaster PCI512 audio card, a message box recommending that you completely uninstall and
remove the older audio device will appear. Click the Yes button and follow the instructions on the
screen to complete the removal of the old audio device. Remove the old audio card from your
computer.
l If your computer detects any other installed audio card, a message box recommending that you
completely uninstall and remove the older audio device will appear. Click the Yes button to continue
with the installation of the audio card.
After the installation of the audio card, completely uninstall the existing card and remove the audio
card from your computer.
If the system has an onboard audio chipset.
Disable your computer's onboard audio chipset. Consult the documentation of your computer's
motherboard for details.
Problems with Sound
No sound from the headphones.
Check the following:
l The headphones are connected to the card's Line Out 1 jack (Front L/R).
l In the Speakers/Headphones tab of the Sound Blaster Z-Series Control Panel, the Headphones
option is selected.
No audio output when playing digital files such as .WAV, MIDI files or AVI clips.
Check the following:
l The speakers' volume control knob, if any, is set at mid-range. Adjust the volume in Mixer Settings
of the Sound Blaster Z-Series Control Panel, if necessary.
l The powered speakers or external amplifier are connected to the card's Line Out jacks.
l There is no hardware conflict between the card and a peripheral device. See Problems with Sound.
l The Speakers/Headphones Configuration settings in the Speakers/Headphones tab of the Sound
Blaster Z-Series Control Panel corresponds to your actual speaker or headphone configuration.
Troubleshooting 46
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creative Sound Blaster Z - SB1502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creative Sound Blaster Z - SB1502 in the language / languages: English as an attachment in your email.

The manual is 5,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Creative Sound Blaster Z - SB1502

Creative Sound Blaster Z - SB1502 User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info