651196
14
Zoom out
Zoom in
Previous page
1/66
Next page
1-2 Installing Sound Blaster Live! Player 5.1
Your Audio Card
Your audio card has these jacks and connectors which allow you to attach other devices:
A jack is a one-hole connecting
interface whereas a connector
consists of many pins. Some
connectors here may not be
available on your card. Refer to
the online
Users Guide,
Hardware Information, for
details on connector pin
assignments.
Line Out and Rear Out jacks can
be used simultaneously to power
4.1 channel speaker systems. In
addition, the Analog/Digital Out
j
ack can be used to power the
Centre and Subwoofer (LFE) for
5.1 channel speaker systems.
CD Audio connector
Connects to the Analog Audio output on a CD-ROM
or DVD-ROM drive using a CD audio cable.
Joystick/MIDI connector
Connects to a joystick or a MIDI device. You can
buy an optional MIDI kit that allows you to plug in
the joystick and MIDI device simultaneously.
Line In jack
C
onnects to an external device
(
such as a cassette, DAT, or MiniD
isc
p
layer
).
Microphone In jack
Connects to an external microphone
f
or voice input.
Figure 1-1: Jacks and connectors on the Sound Blaster Live! card.
Rear Out jack
Connects to powered speakers or an
external amplifier for audio output.
Line Out jack
Connects to powered speakers or an
external amplifier for audio output.
Also supports headphones.
Telephone Answering Device
connector
Provides a mono connection from a
standard voice modem, and transmits
microphone signals to the modem.
AUX connector
Connects to internal audio sources such as
TV Tuner, MPEG, or other similar cards
.
Audio Extension
(Digital I/O) connector
Connects to the Digital I/O
card or Live! Drive.
Warning: This is not
an IDE interface. Do
not
connect to your
IDE devices.
CD SPDIF connector
Connects to the SPDIF (Digital
Audio) output (where available) on
a CD-ROM or DVD-ROM drive
.
A
nalog/Digital Out jack
6-channel or compressed AC-3 SPDIF
o
utput for connection to external digital
d
evices or digital speaker systems.
A
lso supports Centre and Subwoofer
a
nalog channels for connection to 5.1
a
nalog speaker systems.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creative Sound Blaster Live Player 5.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creative Sound Blaster Live Player 5.1 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info