651213
36
Zoom out
Zoom in
Previous page
1/56
Next page
Troubleshooting and Support
This section provides solutions to problems you may encounter during installation or normal use.
No sound from the headphones.
Check the following:
l The headphones are connected to the Headphone jack.
l Ensure the Sound Blaster E3 is turned on.
l Ensure the volume control of the Sound Blaster E3 is not at minimum level.
l Ensure the volume on your connected device or the media player is not muted.
l Ensure no audio cable is connected to the Line In jack when listening to Bluetooth or USB audio.
l In the Speakers/Headphones selection of Sound Blaster E-Series Control Panel, the Headphones
option is selected.
No audio output when playing digital files such as WAV, MIDI files or AVI clips.
Check the following:
l The volume control is set at mid-range. Adjust the volume mixer settings in Sound Blaster E-Series
Control Panel, if necessary.
l The powered speakers or external amplifier are connected to the Line Out jack.
No audio can be recorded from the built-in microphone.
Do the following:
i. Navigate to Windows Control Panel > Sound > Recording tab.
ii. Select Sound Blaster E3 (Microphone) as the default recording device.
iii. In the Mixer selection of Sound Blaster E-Series Control Panel, unmute the Microphone from
Recording option.
No audio can be recorded from the source connected to Line In/Mic In jack.
Do the following:
i. Navigate to Windows Control Panel > Sound > Recording tab.
ii. Select Sound Blaster E3 (Microphone) as the default recording device.
iii. In the Advanced Features selection of Sound Blaster E-Series Control Panel, select Microphone.
iv. In the Mixer selection of Sound Blaster E-Series Control Panel, unmute the Microphone from
Recording option.
The device cannot be turned on after it is turned off.
There is no audio during playback after you turn off and turn on the device.
After you turn off the device, wait for at least 4 seconds before turning on the device again.
Problems with simultaneous playback/recording
To prevent audio distortion during simultaneous playback and recording, the playback and recording
audio formats must be the same. For example, set both the playback and recording formats to either
24-bit/48kHz or 16-bit/48kHz.
Sound Blaster E3 Troubleshooting and Support 35
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creative Sound Blaster E3 - SB1610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creative Sound Blaster E3 - SB1610 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Creative Sound Blaster E3 - SB1610

Creative Sound Blaster E3 - SB1610 User Manual - German - 42 pages

Creative Sound Blaster E3 - SB1610 Quick start guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info