651253
25
Zoom out
Zoom in
Previous page
1/33
Next page
Troubleshooting and Support
This chapter provides solutions to issues that may be encountered during the installation or usage of
your Sound BlasterAxx.
1. The Sound BlasterAxx SBX 10 / SBX 20 does not power on.
The Sound BlasterAxx is designed to be powered on by connecting to a PC / laptop via USB or through a
physical power socket using a USB Power Adapter.
If you are connected via USB, please ensure that the connected computer has recognized your Sound
BlasterAxx correctly. If not, please follow the steps below in order until the issue is corrected.
i. Tighten the USB connection at both ends of the cable.
ii. The USB cable may be faulty. Replace the cable with a working USB cable.
iii. Your computer's USB port may be disabled, or faulty or requires a driver update. Check your
computer's hardware device manager to determine the working status of your USB port. Enable
your USB port and / or update its driver.
If the problem persists, connect the Sound BlasterAxx to a different USB port.
If you are connected via a USB Power Adapter, please check that all cables are tightly connected and
the power socket is turned on.
2. I am having difficulty in linking up the Bluetooth device with SBX 10 / SBX 20.
Ensure that your Bluetooth enabled device supports A2DP profile.
Please also try the following steps:
l Make sure that Bluetooth is enabled (turned on) on your device.
l On some devices, ensure that the Sound BlasterAxx SBX 10 / SBX 20 is selected as the default
headset / wireless stereo audio playback device.
l Make sure that there are no other wireless devices within a 10 meter radius when pairing.
l Position them within 1 meter or closer to each other if you experience pairing difficulties.
l Check if you have input the correct passcode / pin number (0000) on your Bluetooth device.
l Ensure that both, your Bluetooth device and SBX 10 / SBX 20 are not connected to any other
devices.
l Pair the devices again.
l Should the problem persist, reset the SBX 10 / SBX 20 to factory default.
3. Bluetooth link is established and paired between the devices but theres no music.
Ensure that the device’s volume is not set to minimum or muted. With some built-in Bluetooth enabled
computers or 3rd party USB Bluetooth dongles, you may be required to manually specify / set-up the
audio output as the Sound BlasterAxx SBX 10 / SBX 20 (under sound and audio devices section) on your
computer’s operating system.
Note:
Audio transmitted from your Sound BlasterAxx may be slightly delayed; this is due to the
characteristics of Bluetooth technology.
4. No sound from headphones.
Please check the following:
l Headphones are securely connected to the headphone jack.
l Headphones it recognized as the output device in the Speakers / Headphones interface on the
Control Panel.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creative Sound Blaster Axx SBX 10 - SB1390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creative Sound Blaster Axx SBX 10 - SB1390 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info