789647
8
Zoom out
Zoom in
Previous page
1/48
Next page
8ENGLISH
INSTALLATION
INSTRUCTIONS
The temperature setting allows you to adjust it according to your needs:
Adjust the temperature before tasting red wines: recommended temperature 16-17 °C.
If the ambient temperature is higher or lower than the recommended temperatures, this
will have a negative impact on its performance. For example, placing the drive in an ex-
tremely hot or cold location can cause variations in the drive's internal temperature.
The internal temperature can vary depending on the location of the bottles, at the top, mid-
dle or bottom.
Adjustment may be necessary depending on the ambient temperature.
Feel free to leave a thermometer inside the winecooler for regular monitoring.
This winecooler is designed to hold a maximum of 15 standard size wine bottles (75cl) with-
out shelves and 12 standard size wine bottles (75cl) with shelves.
Temperature setting:
The keys and allow you to increase or decrease the temperature in 1°C increments
(temperature range is 4 ~ 22°C)
The button allows you to turn the interior lighting on and off.
In RETRO WINECOOLER:
Press the button 6 seconds to switch from on to off.
When you press the keys and for at least 2 seconds, get the temperature reading
in Fahrenheit or Celsius.
After you set the temperature, the screen will return to displaying the temperature in the
refrigerator, but it might return to the point you have set gradually.
Before putting your winecooler into operation:
Remove all components from both internal and external packaging and verify that none
of the parts are missing.
Before the rst use, it is recommended to wait at least eight hours before connecting the
winecooler so that the oil can return to the compressor. Check that the water reservoir is
in place before plugging in the unit.
Clean the internal surfaces of the unit with a soft cloth and warm water.
Place your unit on a oor strong enough to support the weight of the fully loaded unit, if
on carpet place a wooden board between them. The space in which the product is located
must be at least 1 m3 per 8 g of refrigerant.
Make sure the unit is level by adjusting the front feet under the unit. Make sure that the
winecooler rests on its legs in a stable manner. Do not tilt the winecooler more than 45º
from vertical when moving it.
Install the appliance away from direct sunlight, which can damage the unit's cladding, and
away from heat sources which can increase its power consumption.
Do not use excessive force anywhere. The metal rails on the bottom can have sharp edges,
so always unpack and handle with care. Carefully place the product to avoid scratching
the oor.
This unit is designed for indoor use only.
Caution: Make sure the unit is kept away from any substance that can cause combustion.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Winecooler Retro M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Winecooler Retro M in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info