789618
11
Zoom out
Zoom in
Previous page
1/64
Next page
11
ENGLISH
CANOPY ASSEMBLY
1
2
3
Raise the rosette up to the mounting bracket and align the loosened screws in the mount-
ing bracket with the holes in the rosette.
Rotate the n to adjust. Reinsert the screws and secure with a screwdriver.
Once you have the mounting bracket secured to the junction box you can proceed to hang
the fan.
Hold the fan rmly with both hands. Pass the rod through the mounting bracket opening
and let the ball rest on the mounting bracket.
Rotate the ball coupling until it lines up with the tab on the mounting bracket.
Tip: Someone else should help you hold the ladder and hand you the fan after you get on it.
BLADES ASSEMBLY
Align the holes in the fan blade holder with the holes in the fan blades and motor body
and screw them into place, but do not tighten until they are all in place and screwed down.
Tip: To save time, you can put the washers on each screw before installing the blades.
12
Screws
Check the correct operation of the ceiling fan, checking that no strange movement or
misalignment is observed in any part of the fan.
In the event that some kind of hum / vibration can be seen, you can proceed to adjust the
blades with the shooting kit.
This kit has self-adhesive weights and "u" shaped clips.
Turn off the ceiling fan.
You can put the clip in the center of any blade and check if the vibration decreases.
Turn on the fan and check. If no change is seen, turn off the fan and add another clip to a
different blade or use the adhesive weights.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Windlight Helix DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Windlight Helix DC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 7.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info