789626
7
Zoom out
Zoom in
Previous page
1/40
Next page
7
ENGLISH
To avoid personal injury and damage,
make sure the location to hang the
blades allows clearance of 2.3 m
from the ground and 76 cm from any
wall or obstruction.
Make sure the outlet box is securely
attached to the building structure
and can support the full weight of the
fan.
INSTALLATION PREPARATION
76 cm of
separation
between
the wall or
obstacle. 2.3 m from the
blades to the
ground
To avoid possible electrical shock, before installing your fan, disconnect power by turning
off the circuit breakers at the outlet box and the associated wall switch location. If they
cannot lock the circuit breakers in the off position, securely attach a prominent warning
device, such as a tag, to the service panel.
All wiring used must be in accordance with national and local electrical codes and ANSI /
NFPA 70. If you are not familiar with wiring, contact a qualied electrician.
To reduce the risk of personal injury, do not bend the blade support system when installing,
balancing, or cleaning the fan.
Never insert foreign objects between the rotating fan blades.
To reduce the risk of re, electrical shock, or motor damage, do not use solid-state speed
control with this fan. Use only original speed controls.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children must not play with the appliance.
Cleaning and maintenance of the appliance should not be carried out by children, unless
they are over 8 years of age and supervised.
Close supervision is necessary when any appliance is used by or near children.
TIP: Important precautions and safety instructions appearing in the manual are not intended
to cover all possible conditions and situations that may occur. It should be understood that
common sense and caution are necessary factors in the installation and operation of this fan.
Mark the correct position of the holes and x the ceiling support using the screws with
metal plugs or screws and washers appropriate to the type of ceiling chosen.
Check the correct installation of the bracket before hanging the fan. This plate must
support the entire weight of the fan.
Do not x the mounting bracket directly on ceilings with thickness less than 10mm to avoid
the risk of the screw loosening.
INSTALLATION INSTRUCTIONS
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Wind Tube at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Wind Tube in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info