789613
9
Zoom out
Zoom in
Previous page
1/48
Next page
9
ENGLISH
CHECK INSTALLATION
LED PANEL INSTALLATION
Single pin plug
LED panel
Connect the single pin plugs on the breakout board to those on the LED panel. The LED panel
is magnetized so it attaches to the backplane by simply snapping the two pieces together.
Note: While installing or removing the LED board, be careful not to touch the insulating tabs.
Do not overtighten or fasten the screws as this may cause damage to the insulating tabs.
Put the decorative screen on the LED plate.
Check the correct operation of the ceiling fan, checking that there is no strange movement
or misalignment in any part of the fan.
In the event that some type of buzzing/vibration can be seen, you can proceed to adjust the
blades with the balancing kit.
In this kit you have self-adhesive weights and "u" clips.
Turn off the ceiling fan.
You can put the clip in the center of any blade and check if the vibration decreases.
Turn on the fan and check. If no change is seen, turn off the fan and add another clip on
another blade or use the adhesive weights.
CONNECTION PANEL MOUNTING
Attach the plate to the bottom of the fan by inserting the screw heads into the designated
screw holes. Thread the screws and then secure them.
Patch panel Panel screws
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Wind Calm Patio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Wind Calm Patio in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info