820792
6
Zoom out
Zoom in
Previous page
1/72
Next page
ENGLISH
6
ENGLISH
Thank you for choosing our ceiling fan. Before using this appliance and to ensure its best
use, please read the instructions carefully.
The safety measures listed here reduce the risk of re, electric shock, and injury when
followed correctly. Please keep the manual in a safe place for future reference, as well as
the sales receipt and box. If applicable, give these instructions to the future owner of the
appliance.
Always follow basic safety instructions and hazard prevention measures when using an
electrical appliance. The manufacturer will not be responsible for any damage resulting
from the user's failure to follow these instructions.
According to safety regulations, the lowest point of the fan blade must be at least 2.3m (7
feet) from the oor.
Please make sure the chosen location will not allow the rotating fan blades to come into
contact with any objects.
Ensure ceiling joists are sound and are large and strong enough to support the weight of
the fan.
To reduce the risk of re, electric shock or personal injury, ensure that the fan mounting
bracket is attached directly to the building structure. Do not mount to an outlet box.
The mounting bracket must be rmly screwed to a load bearing structure, e.g. a concrete
ceiling, steel structure or timber frame. If a timber frame is added, it must be securely
nailed or screwed between two beams.
To reduce risk of personal injury and property damage, do not bend or damage the downrod
or the fan blades when handling or installing them. If you notice any product imperfections,
please contact our after-sales service before proceeding to install the fan.
Make sure the ceiling fan is securely fastened to the ceiling. All set screws must be
checked and re-tightened where necessary before fan operation.
Turn off the power before performing any work on the ceiling fan and turn off the power
breaker. To avoid possible electrical shock, check that the power is turned off at the fuse
box or circuit breaker panel before wiring.
The fan, mounting bracket and lighting equipment must be connected to a ground. Check
that all splices are well insulated.
Check and conrm that all connections are correct and secure. Once all electrical connec-
tions have been made, store all cables securely.
Do not attempt to control this fan from a wall switch or remote control that is not approved
by the manufacturer for use with the fan. Do not use a solid state controller. Use of a
non-approved wall switch or remote control will void your warranty.
Do not connect the ceiling fan to a dimmer switch.
LOCATION AND INSTALLATION REQUIREMENTS
MECHANIC TIPS
ELECTRICAL TIPS
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Wind Calm Line - Vertical at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Wind Calm Line - Vertical in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Create Wind Calm Line - Vertical

Create Wind Calm Line - Vertical Installation Guide - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info