Manual Create Wind Calm Line - Horizontal (page 11 of 72) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

820791

Zoom out

Zoom in

1/72

ENGLISH

WIRING CONNECTION

Make the connection between the receiver wires and the fan motor wires following the color

indications. Make sure the connection is tight.

1. Insert the driver inside the motor body.

2. Hook the engine body onto the left hook of the body mount and route the wiring so it does

not get pinched.

3. Position the motor body so that the holes t and then screw the 4 body bracket screws to

the motor body.

Note: Make sure that the motor body is perfectly installed to the ceiling.

RECEIVER PLACEMENT

BLADE ASSEMBLY

Advice: Washers for the blade screws can be placed on each screw before installing the

blades.

1. Align the blade holes with the screw holes on the motor, and then tighten all the screws

Select the blade screws and attach the rst blade, lining up the holes in the motor with

the holes in the blade. Screw the blade in so that it is secured but without tightening the

screws too much to be able to place the rest.

2. Repeat the previous step with the rest of the blades.

3. Once all the blades are in place, tighten the screws completely so that the blades are fully

secured.

Remote

control

receiver

Take ground

L input (black)

Input N

(white)

DC L motor (gray)

DC L motor (red)

DC L motor (pink)

Ground (green/yellow)

1 2 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Create Wind Calm Line - Horizontal in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Create Wind Calm Line - Horizontal

Create Wind Calm Line - Horizontal Installation Guide - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Create Wind Calm Line - Horizontal Manual

Product: