789750
9
Zoom out
Zoom in
Previous page
1/48
Next page
9
ENGLISH
VOLUME CONTROL
USB CHARGING
WIRELESS CHARGING
LOW BATTERY AND CHARGING
MAKING PHONE CALLS VIA BLUETOOTH
Press + button to increase the volume.
Press - button to decrease the volume.
When the speaker is powered on, or connected with the AC adapter, the USB ports can
charge an iPhone and an Android mobile phone at the same time (for example). When the
speaker is turned off, the USB port cannot charge any external devices.
The charging coil of the wireless charging devices (The mobile phone which can support
Qi standard of wireless charging) needs to aim at the wireless charging mark which is in
the middle of the table speaker, when the speaker is powered on or connected with the
AC adapter. You will see the charging mark on the screen of your mobile phone or you will
hear a sound after connecting with the device for wireless charging.
When the battery capacity is low, you will hear “Low Battery” to remind the user that the
speaker needs to be charged. lf the user does not connect the speaker to charge it, the
speaker will be automatically powered off.
After connecting the AC adapter to the port on the back of the speaker, the red LED
light will be on while charging. The red LED light will turn off when the speaker is fully
charged.
Caution: The LED light turns red for one second after connecting the AC adapter. Then,
the LED light will turn off. It means the built-in battery is fully charged.
When a call comes in, the speaker will broadcast the incoming calls phone number and
the dial tone. Shortly press the Play/Pause/phone button to answer the phone (try to
speak to the MIC so it will be a clear call). Short press again to hang up, and long press
to decline.
Double press the Play/Pause/phone button for dialing the phone number of the last call
in record.
TWS FUNCTION
TWS feature allows you to link two speakers together. The rst table will be the master
connected to the Bluetooth device and operate all controls. The second table is a linked
speaker giving True Wireless Sound.
1. Turn on both table speakers, double click the POWER/TWS button on one of the two
table speakers, both speakers will enter team paring mode, you will hear an acoustic
signal, both blue LED indicators of both table speakers will ash rapidly at the same
time. After the team paring, the LED indicator of the rst speaker (Master) will remain
ashing slowly. The LED light of the second speaker (Sub-speaker and linked TWS) will
be green. After connecting with a phone or other Bluetooth device, the Master speaker
LED will be xed blue, the LED light of the sub-speaker will be xed green.
2. When speakers are team paired successfully, short press POWER/TWS button of the
Master speaker or the sub-speaker to switch off the team pairing TWS mode.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Speaker Table at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Speaker Table in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 8.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info