789671
11
Zoom out
Zoom in
Previous page
1/56
Next page
11
ENGLISH
PROBLEM SOLVING
PROBLEM CAUSE SOLUTION
Unable to function
normally
1. The plug does not connect
properly.
2. The components of the
machine are not installed in
the correct position.
1. Reinsert the power plug securely.
2. Reinstall the components according to
the user manual.
Stops midway during
use.
1. The feeding cup is not
installed correctly.
2. Inserting too many
ingredients or running
continuously for too long
causes the motor to stop
automatically.
1. Make sure the feeding cup is installed in
the correct position.
2. Push the switch to the stop level and
remove the power plug.
3. Remove the feed cup and reduce the
ingredients.
4. Assemble the feeding cup, insert the
power plug and turn the switch to "STA" to
continue working.
5. If the device stops due to too long
working time, please turn off the power
of the device. Half an hour later, keep it
running.
Difculty disassembling
the pressing cup once
the squeezing is nished.
Ingredients were added too
quickly, causing a crash.
Turn the switch to "REV" and run the device
for about 3 seconds.
Louder noise during
work.
The degree of noise differs
from the type and size of
the ingredients.
Cut the ingredient into smaller pieces to
reduce the noise properly.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Slow Juicer Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Slow Juicer Mini in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 6.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info