789755
10
Zoom out
Zoom in
Previous page
1/56
Next page
10 ENGLISH
When the tonearm is on the clamping piece, the Bluetooth function starts automatically.
Press the key MODE to switch between USB, SD and Bluetooth functions.
BLUETOOTH CONFIGURATION
HOW TO REPLACE THE NEEDLE HEAD
CLEANING
1. Open the tonearm clamp.
2. Remove the cartridge cover to expose the needle.
3. Carefully separate the cartridge from the cartridge holder.
4. Pull the audiolines carefully from the cartridge, taking care to pull the terminal connector
and not the cable.
5. Carefully insert the audio lines.
6. Make sure that the audio lines do not touch each other.
7. Carefully slide and x the cartridge into its holder.
To t a new cartridge, repeat process 3 and 4 in reverse order.
Note: Take special care while changing the head to avoid damage to the boom or the audio
cable. The turntable head should be replaced every 3 to 4 months of continuous use. Ceramic
heads are easily found in specialist stores and websites.
We recommend to clean your records with an anti-static cloth in order to enjoy optimum
playback quality and to help make them last.
For the same reason, your stylus should be replaced periodically (approximately every 250
hours of total playback time).
Clean the dust on the stylus from time to time by using a very soft brushe dipped in alcohol
(brushing from back to the front of the cartridge.
RECORDING
While playing a vinyl, just press (about 3 seconds) the key MODE. Then the device starts
recording music while ashing a green light until you press the key to stop recording.
Remember you can only record from vinyl to USB / SD cards.
Press to play the previous songs.
Press to play the next songs.
Press the key MODE to select USB, SD / MMC, Bluetooth mode or to start recording what is
being played on a USB or SD card.
Press the key in the playback mode to start or pause it. Long press to erase what is cur-
rently recorded. In recording mode, press this key to stop recording.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Retro Player Wood at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Retro Player Wood in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info