Manual Create Blender Stylance (page 9 of 48) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

789656

Zoom out

Zoom in

1/48

ENGLISH

SHAKE

1. Put the food to be processed in the jar.

2. Put the lid rmly on the jar. Insert the gauge cap into the cap opening and turn clockwise

to lock.

3. Plug it in, then turn ON and choose the "Smoothie" program.

• Speeds:

• Low: Light mixes with liquid ingredients.

• Half: Thicker consistency, with a mixture of liquid and solid ingredients.

• High: Instant energy burst.

4. After use, always turn the switch to the OFF position and unplug the main unit.

5. To remove the carafe, lift it up; no need to twist it.

INSTRUCTIONS FOR USE

• In the wheel panel: OFF means off; ON implies standby mode, you can use the program

function; and MAX is a continuous speed control where the maximum speed remains at

the same MAX.

• Use the rotary button to turn on, turn off and change the speed.

• The blender has three different programs to choose from: “ice crush” to crush ice; smoothie

for smoothie; and “interval” to cut intermittently (turn, stop, turn, stop, etc.).

• Turn the button to ON and choose your program. If the product works in “Smoothie” mode,

press the “Smoothie” button, the product will stop working and enter standby mode. If you

press another function mode, the product will switch to the corresponding new mode.

• The maximum capacity of the jug is indicated on it, do not allow it to exceed the maximum

indicated on the level mark.

• This blender does not allow its operation if it is empty, as a suggestion use 2 parts of fruit

and 3 of water (with fruits such as carrots, apples, etc.) and the operating time should not

exceed 2 minutes.

Caution:

• The mixer has a safety switch. If the blender jar is not in position or if you remove it during

operation, the product will not work. You need to put the blender jar in its correct position,

turn the knob to “0” position, and then you can start using the product.

• Includes overheat protection. If the product overload works for a long time, the thermal

limiter will stop the product to prevent the motor from overheating. If the thermal limiter

works, reduce the load on the mixer jar and wait almost 30 minutes for the motor to cool

down, then use the product again. If the LED light continues to ash but the product still

does not work, please wait another 10-20 minutes.

• Over current protection. If you blend very hard or large foods incorrectly, the blade may get

stuck and the current limiter will stop the product. If the current limiter is in operation, turn

off the product and remove the very hard or very large food, then use the product again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Create Blender Stylance in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Create Blender Stylance Manual

Product: