611261
7
Zoom out
Zoom in
Previous page
1/11
Next page
6
ASSEMBLY
ALWAYS use fresh cool water when operating the humidifier.
1. Turn Water Tank upside down and unscrew Water
Tank Cap. NOTE: The opening next to the water tank
cap is the mist channel. The mist channel is enclosed
in plastic. The mist outlet channel is separate from
the water in the water tank. See FIG. 4 #13 page 4.
2. Fill Water Tank with cool water. DO NOT fill water all the way to the rim.
DO NOT CARRY FULL WATER TANK BY HANDLE.
ALWAYS HOLD WATER TANK WITH TWO HANDS.
DO NOT use hot water. Use cool tap water.
DO NOT add any medication, essential oils, or salt.
DO NOT pour water into Mist Outlet Channel.
3. Screw Water Tank Cap back
onto Water Tank. Turn the Water Tank over and place on
Water Basin, making sure it fits perfectly.
Note: Do not attempt to move the humidifier while
Water Tank is placed on the Water Basin. Doing so may
cause leakage of water and/or Water Basin to overfill.
4. Plug the power cord into a wall socket and turn on the unit by using the Control
Knob.
5. The Power Indicator Light will illuminate in red. Within a few seconds, it will
switch to green, indicating that there is enough water in the Water Basin. Mist
will begin emitting through the Mist Lid.
6. Use the Control Knob to adjust the intensity of the mist output. It is best to have
the mist knob at a medium setting.
SET THE CORRECT HUMIDITY
OUTPUT: Adjust the Control Knob
so that the mist rises up to be
absorbed by the room air. Do not
set Control Knob too high, as the
mist cannot be absorbed by the air
and may accumulate on the
surfaces around the humidifier.
7. When the humidifier runs out of water, the Power Indicator Light will turn red and
the mist output will stop. This is a safety feature to prevent the humidifier from
possibly overheating and damaging the Nebulizer. Turn the humidifier off and
unplug the unit before removing and refilling the water tank.
Note: The Power Indicator Light on the humidifier will remain on. The
red light indicates that the humidifier is turned on and needs to be
refilled.
correct
incorrect
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crane EE-8190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crane EE-8190 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info