611235
6
Zoom out
Zoom in
Previous page
1/10
Next page
5
ASSEMBLY
WARNING: Do NOT use this tower heater if any part has been under water.
Immediately contact Crane Customer Care or a qualified electrician to inspect or replace
the heater if necessary. Keep plastic wrapping away from children.
1. Open the packaging, take the unit out and unscrew the Cover Fixer.
Be responsible when handling the packing materials.
2. Insert the Glass Base into the bottom of the unit and screw on the Cover Fixer.
3. Place the unit upright on a flat floor before use.
OPERATION AND USE
1. Place the heater on the floor in the desired location.
WARNING: Keep combustible materials such as furniture, pillows, bedding,
papers, clothes and curtains at least 3 feet from the front of the heater. Also
keep them away from the sides and rear.
2. Ensure that the heater’s Power is Off.
3. Plug the heater into a 120VAC outlet. This heater has a
polarized plug ((one blade is wider than the other). As a
safety feature to reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
4. Choose your desired heater setting (below) and enjoy your new tower heater.
Display Panel
1. Press to turn on the heater, press it again to turn off the heater.
2. When the unit is on, press
to switch Low/High power.
3. When the unit is on, press
to switch On/Off the oscillation function.
4. When the unit is on, press
H / °F to set time and temperature.
a) Set Time: Press
H / °F once, then use and to set time from 1h to
12h.
b) Set Temperature: Press
H / °F a second time, then use and to set
temperature in the range 59-95 °F. Each time you press the buttons
or
the temperature will increase or decrease by 1°F.
5. Press
H / °F a third time to confirm your set time and temperature. Once you
have done so, the display will read the current room temperature and will
automatically maintain the set temperature by turning the heating elements on
and off during the set time.
Note: If you touch the sensor H / °F , the control light will flash for a time of 5
seconds. If you do not press any button within 5 seconds or you press a button other
than SET,
or , then the LED display will display the temperature in the room.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crane EE-8079 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crane EE-8079 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info