818973
5
Zoom out
Zoom in
Previous page
1/422
Next page
WARNING
If parts of the machine are damaged, do not use the machine.
If parts are missing, do not operate the machine.
If parts are damaged or missing, contact the service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with local regulations.
WARNING
For your personal safety, do not insert battery before the tool is assembled completely.
3 INSTALLATION
3.1 INSTALL THE SEAT
See figure 3
1. Place the seat assembly over the seat panel and align holes as shown.
2. Install the bolts, washers and nuts and tighten securely.
3. Attach the sleeves to the nuts.
4. Make sure it is securely seated.
5. Connect the seat plug to the machine.
3.2 INSTALL THE MULCH COVER
See figure 4
The mower is configured for side discharge when shipped. If mulching is desired:
1. Place the mulch cover on the tab on the mower housing.
2. Align the holes in the mulch cover and the holes in the mower housing.
3. Install and tighten the bolts, screws, fixation clamps and bearing ring as shown.
3.3 INSTALL THE STEERING CONTROL LEVER
See figure 5-6
WARNING
The left and right steering levers should be adjusted so that they align with each other when in the neutral position.
NEVER install the steering levers in an asymmetrical operating height.
1. Lift one steering control lever to align the holes in the lever with the holes in the corresponding mounting pole.
2. Select the preferred steering-lever operating height. Insert the screw together with the washer into the hole.
3. Use the wrench (13*16 mm) to secure the steering lever.
4. Assemble the other steering control lever in the same way.
CAUTION
Do not install the steering control lever reversely.
5
English EN
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 82ZT107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82ZT107 in the language / languages: All languages as an attachment in your email.

The manual is 7.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info