818981

Cramer 82LM61S Manual

12
Zoom out
Zoom in
Previous page
1/320
Next page
11
cramer.eu
EN
Replacing The Cutting Blade (see Figure 10-11)
NOTE: Only use authorised replacement blades. Replace worn or damaged
blades and bolts in sets to preserve balance.
1 Stop the motor and remove the safety key. Allow blade to come to a
complete stop.
2 Remove the battery pack.
3 Turn the mower on its side.
4 Wedge a block of wood between the blade and mower deck to prevent the
blade from turning.
5 Loosen the blade bolt by turning it counterclockwise (as viewed from bottom
of mower) using a 27 mm wrench or socket (not provided).
6 Remove the blade bolt and blade.
7 Place the new blade on the shaft. Ensure blade is properly seated with shaft
going through center blade hole and the two blade posts on the fan inserted
into their respective holes on the blade. Make sure it is installed with the
curved ends pointing up toward the mower deck and not down toward the
ground. When seated properly, the blade should be flat against the fan.
8 Thread the blade bolt on the shaft and finger tighten.
9 Torque the blade bolt down clockwise using a torque wrench (not provided)
to ensure the bolt is properly tightened. The recommended torque for the
blade bolt is 62.5~71.5 kgfcm (350-400 in.-lb.).
Vertical Storage Function (see Figure 12)
1 Remove the battery from the mower.
2 Remove the grass catcher bag.
3 Rotate the handle knobs to the unlocked position.
4 Lower the handle assembly and rotate the handle knobs to the locked
position.
5 Lift the mower by the front end to the vertical position.
WARNING!
Always remove the battery from the mower before placing the
unit in the vertical storage position.
Storage Switch
When the handle is rotated into the fully locked storage position, the mower is
equipped with a storage switch that will disable the mower from running in the
storage position. The storage switch does not replace the need to remove the
safety key and battery to prevent accidental start-up or unauthorized use.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 82LM61S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82LM61S in the language / languages: All languages as an attachment in your email.

The manual is 2.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cramer 82LM61S

Cramer 82LM61S User Manual - German - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info