T
Setting WiFi Security on your CradlePoint Router
WiFi is highly WiFi Security is
User Login
computers to your router unless they have your wireless security password.
F
1) Access your r
http://1 in the address bar.
2) Enter your DEFAULT ADMINISTRATIVE PASSWORD . This password is the last
six digits of the MAC address found on the label on the bottom of your router.
3) Once you are BASIC tab, click S WIZARD, click NEX.
4) You will see a summary of the upcoming Setup Wizard Steps, click NEXT .
5) The default Administrative password should appear. Select your TIME ZONE, click NEXT .
6) One option to establish network security is by selecting REQUIRE USER LOG-IN. By using
this setting, you will force every user of the router to log-in using the User Login Password
(Set in a separate location in the User Interface) . By turning OFF the Require User Log-In,
you will still be able to secure your network using the settings below.
7) The next option is to select an appropriate LEVEL OF WIFI SECURITY. This will allow you
to create an encrypted security key for your network based on the security mode you select.
Choose the security mode that best fits your needs: GOOD for WEP, BETTER for WPA and
BEST for WPA2. (Make sure your PC or other devices support the mode you choose.) Choose a
personalized SECURITY PASSWORD . This password will be used to re-connect your devices
to the router once the security settings have been changed. Click NEXT
9) Record the setup information shown on the final summary page, then click CONNECT .
This will save your new settings and apply them to your router. If you are using WiFi, you
You’ve now secured your CradlePoint router from unintended WiFi access.
Your USB Modem or Phone Does Not Work With the Router
1) If your
must
an u
Crad
The cradlepoint.com/suppo
2) Someti
On
rout
If,
cont
You are Connected to the Router but Cannot Connect to the Internet
The status LEDs of your router will give you an indication whether or not a proper connection is
being made. See the LED STATUS definitions below:
If
may
If, after updating, you a
Green
The MBR900 is powered on.
No Light
The MBR900 is not connected to power. Check that the unit is connected to an outlet.
Green
The Wireless LAN is active and available to share.
No Light
The Wireless LAN is not active.
Green
Connected to an active Ethernet Connection.
No Light
Not connected to Ethernet, the connection is not configured correctly, or Cable or DSL modem
is not configured correctly (or turned on).
Green
Data connection has been established with your cellular network.
No Light
Cellular network is unavailable or connection is still in progress.
Standard connection time is 15-30 seconds.
When your MBR900 is up and running,
The MBR900 must be powered using an approved power adapter
Y
The
I Need To Update My Firmware
To support th
1) Access your
http://1 in the address bar.
2) Select the TOOLS tab on the top FIRMWARE menu on the
3) Select ONE- for easy firmware u
If you experi you ca
1) Download thcradlepoint.com
2) Select the TOOLS tab on the top FIRMWARE menu on the
3) In the FIRM section,BROWSE.
4) Browse for OPEN.
5) Click the U button. The up
DO NOT TURN O
My WiFi-enabled Devices Can’t Get Past The Login Page
Some el
Devices that
• iPod Touch
• iPhone
• Wireless Vo
To Allow Thes fol
1) Access your
http://1 in the address bar.
2) Go to the T tab on the top nU menu on the
3) Uncheck theREQUIRE USER LOGIN c
4) Scroll to tSAVE THE SETT , which will save
Note: Because the User Login page adds security and access control to others connected to your router,
you may need to enable additional security features such as WEP, WPA, or MAC Address Filtering (if you
are not already doing so) when turning off the User Login Page. See the “Setting WiFi Security on your
CradlePoint Router” section of this guide for details.
• Wireless Pr
• most WiFi-e
• most WiFi-e
Regu
can radiate radio frequency energy and, if not installed and used in accordance with the
instr
inter
insta
the e
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio or television technician for help.
Changes or modifications not expressly approved by CradlePoint, Inc. could void the user’s authority to operate the product.
Radio Frequency Interference Requirement - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Warranty Information
CradlePoint, warrants this against defects in materials workmanship to the original (or the first
purchaser in
is limited to a repair or replacement of the product, at CradlePoint’s discretion.
Within
may return the product to the point of purchase for a full refund of the purchase price.
If
may
subject to CradlePoint, Inc.’s existing return policy.
Still Have Questions??
EMAIL s
CHAT c
CALL (208) 424-5054 Option #2
M
c
visit
or
