430998

Cp technologies wbr 3408 Manual

25
Zoom out
Zoom in
Previous page
1/112
Next page
Setup
25
SSID 1/2
This is also called the "Network Name".
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
To communicate, all Wireless stations should use the same
SSID/ESSID.
Broadcast
SSID
If enabled, the Wireless ADSL Router will broadcast its SSID.
This allows PCs and other wireless stations to detect this Access
Point and use the correct SSID.
If disabled, PC users will have to manually enter the SSID and
other details of the wireless interface before they can connect to
this Access Point.
Isolation within
SSID
If Enabled, devices that have the same SSID will not be able to
see each other.
Security Set-
ting
The current Wireless security is displayed. The default value is
Disabled.
Configure SSID
1/2 Button
Click this button to access the Wireless security sub-screen, and
view or change the settings. See the following section for details.
Options
802.11 Mode
Select the desired mode:
Off - Wireless is disabled.
B only - Only 802.11b connections are available. 802.11g
Wireless Stations will only be able to use the Wireless Rou-
ter if they are fully backward-compatible with the 802.11b
standard.
G only - Only 802.11g Wireless stations can use the Wire-
less Router.
11b/g - 802.11b and 802.11g Wireless stations can use the
Wireless Broadband Router.
Channel NO.
Select the Channel you wish to use on your Wireless LAN.
If you experience interference (shown by lost connections
and/or slow data transfers) you may need to experiment with
different channels to see which is the best.
If using multiple Access Points, adjacent Access Points
should use different Channels to reduce interference.
Isolation
between SSID
If Enabled, devices that have the different SSIDs will not be able
to communicate with each other.
WMM Support
Enable by default.
Bandwidth
Select the desired bandwidth from the list.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cp technologies wbr 3408 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cp technologies wbr 3408 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info