9
User and installation instructions
Contents of this document
1. Important safety instructions
2. Installation instructions
3. User manual
4. Technical specifications
1. Important safety instructions
While using the Cosiscoop Pillar these safety instructions should always be followed to reduce the risk of fire and
other damage to people and property. Read these safety instructions carefully before the Cosiscoop Pillar is put
into operation.
1. The Cosiscoop Pillar should always be installed correctly and in accordance with the supplied installation
instructions. The Cosiscoop Pillar must be placed in a straight position on a hard, stable surface.
2. Only use the type of gas and the type of cylinder specified in these instructions.
3. The device must be placed far away from flammable materials (min. 1 meter) and the area around the
appliance must be clear of combustible materials and/or liquids.
4. Before using the Cosiscoop Pillar, check whether all connections to the gas bottle are fitted securely.
Also ensure that the regulator seal is fitted correctly and able to fulfil its function. If the connections are
not connected securely, make sure everything is fixed and tied before use. Make sure that the gas is
turned off while fixing.
5. Change the gas cylinder in an amply ventilated area, away from any ignition sources (candle, cigarettes,
other flame producing appliances).
6. Every time the gas connection is re-connected, or at least once per month, the gas connection and the
hose must be checked for leaks. The hose or the flexible hose must be changed within the prescribed
intervals. See chapter 2.4.
7. The hose must never make contact with the hot surface of the burner.
8. The hose must comply with the national laws and regulations (EN 16436). The hose will be connected
to the supplied gas pressure regulator. Do not connect the gas bottle directly to the appliance without
regulator.
9. The gas regulator has to be set according to the specific gas category (see data figure). The regulator
should comply with EN 16129 standard.
10. Never change the air valve settings of the burner. If the air vents of the fire rings are obstructed,
immediately contact a technical gas specialist for help.
11. In the event of gas leakage, the appliance may not be used. If it’s already in operation, the gas supply
must be shut off and the appliance shall be investigated and rectified before it is used again.
12. Never obstruct the free flow of air and oxygen to the device. Never change anything to the technical gas
system of this unit. Any change to the system can be dangerous and will void any warranty on the device.
13. The injector in this appliance may not be removed and the injector can only be installed by the
manufacturer.
14. This appliance is not allowed to switch from one amount of gas pressure to another amount of gas
pressure.
15. Keep children and pets at a safe distance from the unit. The Cosiscoop Pillar has components that
become very hot when in use. Wait until the appliance has cooled down sufficiently before allowing
children and pets to come within the vicinity of the device. Our recommendation is to wait at least 1.5
hours.
16. Never move the Cosiscoop Pillar if the device is turned on. Wait at least 1.5 hours after the device has
been turned off before touching or moving it. Shut the valve of the gas cylinder or the regulator before
moving the appliance.
17. Never leave the Cosiscoop Pillar unsupervised while it’s in operation.
18. The device has an open fire, so make sure that children and pets are always supervised by a mature and
responsible person while using the Cosiscoop Pillar.
19. Do not touch the pebbles and glass until they are completely cooled down.
20. Turn off the gas supply when the device is not in use.
21. Wait at least two hours after the device has been turned off before placing the all-weather cover on the
unit. If the cover is placed before the Cosiscoop Pillar is completely cooled down, damage to the cover
or even fire may occur.
