14
the cover immediately after usage of the device, the cover will gain damage and possibly even catch fire.
Note: Have you purchased a teak Cosiloft? Than you should take notice to never place the cover over teak
wood. Unfortunately, teak is not suitable to be covered. You can leave the teak table top outside or store it in a
garage or garden shed, for example. For information about the maintenance and treatment of teak wood, see
the 'FAQ' page on our website www.cosi-fires.com
3. User manual
- Always make sure that the instructions in this user manual are followed precisely. If these instructions
are not followed correctly, this can result in fire or explosion that could cause damage to persons,
property or loss of life. Never use flammable liquids or vapors in the vicinity of a burning device .
- Improper installation, adjustments or modifications to the equipment can result in injury or property
damage. Read the installation instructions, safety precautions and operating instructions very
carefully.
- Do not leave the Cosiloft unattended when it is in use or when it is connected to a gas bottle.
- What to do if the device emits a smell of gas:
o Shut off the gas bottle immediately and contact a technical gas specialist. Do not use the
device until it is approved for use again.
- Installation, maintenance and service needs to be performed by a qualified gas technician in these
cases.
- Only use the Cosiloft outdoors or in a well-ventilated area. Never use the Cosiloft inside a building,
house, garage or any other enclosed area.
- Gas bottles must be stored outdoors and in well-ventilated areas. Make sure that gas bottles are out
of the reach of children.
- The Cosiloft is best stored in a garage or well-ventilated area . Store the Cosiloft only when it is
disconnected from the gas bottle.
- The Cosiloft is not qualified as a cooking appliance and therefore must not be used as a cooking
appliance.
- Check for gas leaks at least once a month and every time a change is made to the unit.
- Keep the area around the Cosiloft clear of combustible liquids, materials and vapors. Never throw
anything into the flames of the Cosiloft.
- Never use a fuel other than propane gas.
Turning on the Cosiloft
- Make sure the Cosiloft is stable and in solid state.
- Remove the protective cover.
- Press the control button fully until you hear a slight ticking sound (this is the piezo ignition). If you
don’t hear anything when pressing the ignition button, you probably need to replace the battery. Keep
the control button pushed in when you open the gas supply and turn the control button to ‘HIGH’ for
gas supply. The burner should now ignite within 15 seconds. When the burner produces a complete
flame, hold the control button for another 15 seconds. The flame should keep burning now. In case
the flame goes out however, you should try the same process again and hold the gas supply button a
little longer.
Switching off the Cosiloft
- Turn the control button towards ‘LOW’ to extinguish the flame. When the flame is extinguished
entirely, you shut off the gas valve on the gas bottle.
- Let the lava rocks and ceramic logs cool down completely and place the protective cover over the
Cosiloft.
