719034

Cosi Cosicube 70 Manual

11
Zoom out
Zoom in
Previous page
1/31
Next page
11
Gebruiks- en montagehandleiding cosicube / Operating and assembly instructions cosicube / manuel de montage et mode démploi cosicube
22. Ensure that the hose is always bent straight down towards the cylinder and never printed against hot
surfaces of the model.
2 . Installation instructions according collection: Cosicube
The cosicube is supplied complete with pressure regulator (30 mbar) and gas hose. You only need to purchase a
gasbottle. These can be purchased at your local gas supplier.
1. Installing the Cosicube
Get your cosicube carefully from its packaging. Select the location for your Cosicube. The location must meet
the following conditions:
- Make sure that the Cosicube is placed on a paved (preferably stone) surface. The surface should be
completely flat and clean
- The Cosicube should be placed at least two meters away from flammable materials and liquids.
If the Cosicube is installed properly, you can place lava rocks and ceramic logs on the top. Grab first the small
lava stones and place them on the ground. Every Cosi fires is deliverd with 1.5kg small lava stones and 1.5kg
large lava rocks included. Take the small lava stones without grit and place it gently on the lid. Repeat the same
with the big lava stones and make sure it is covered with lava rocks. Make sure you keep the ignition unit free
of lava stones (see picture). After placing the lava rocks,get the ceramic logs out of the packaging. The Cosicube
is always included with four ceramic logs. The ceramic logs insert a campfire in the fire ring back. Make sure the
fire ring is minimal covered by the logs. When the logs block the fire ring, there will be a dangerous situaties.
The blockade of the fire ring will affect the air flow of the ring and the flames will be different. This results in
dangerous situations!
If you want to reorder the lava stones or ceramic logs, this is possible with Gimeg. Use the following part
numbers:
- 5950150. Small lava stones
- 5950160. Large lava stones
- 5950170. Four ceramic logs.
When you are going to use the Cosicube for the first time, make sure that the device is turned at the
highest setting for 15 minutes. In this way, the lava stones are heated through and this ensures that
any bumps or air bubbles will disappear from the lava rocks
When you want to move or cleanup the lava stones and ceramic logs, make always sure that they have
cooled down completely.
The lava rocks and logs can be scorching black in time. This has to do with soot formation which always occurs
in devices which show a yellow flame. This soot can be removed by blowing / vacuuming with a vacuum
cleaner. The carbon black may be also brushed off with a dry brush.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cosi Cosicube 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cosi Cosicube 70 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info