719158
12
Zoom out
Zoom in
Previous page
1/32
Next page
12
2 . Installation instructions according collection: Cosibrixx 90
The Cosibrixx is supplied complete with pressure regulator (30 mbar) and gas hose. You only need to purchase
a gas bottle. These can be purchased at your local gas supplier.
1. Installing the Cosibrixx
Carefully remove your Cosibrixx from its packaging and select the location for your Cosibrixx. The location must
meet the following conditions:
- Make sure that the Cosibrixx is placed on a paved (preferably stone) surface. The surface should be
completely flat and clean.
- The Cosibrixx should be placed at least two meters away from flammable materials and liquids.
Before the Cosibrixx is ready to use you have to place an AAA battery for the piezo ignition. Please see ‘2.5
Replacing the battery for the piezo ignition.’
When the Cosibrixx is installed properly, you can place the lava rocks and ceramic logs on the top. Start by
unpacking the small lava rocks and place these on the ground. Every product from Cosibrixx is supplied with small
and large lava rocks. Take the small lava rocks without grit and place these gently on the model. Repeat the
process with the big lava rocks and make sure the fire ring is covered with lava rocks. Keep the space around the
ignition unit free of lava rocks.
After placing the lava rocks, unpack the ceramic logs. The Cosibrixx is always supplied with four pieces. Place the
ceramic logs as a camp fire over the fire ring.
Make sure the fire ring is only minimally covered by the logs. If the logs block the fire ring, dangerous situations
may occur. The blockade of the fire ring will affect the air flow of the ring and the flames will be different. This
results in dangerous situations!
If you want to order more lava stones or ceramic logs, this is possible at your purchase address.
Ready to use the Cosibrixx for the first time? Make sure that the device is turned on at the highest setting for 15
minutes. This way, the lava rocks are heated through and this ensures that any bumps or air bubbles will
disappear from the lava rocks. Keep at a safe distance of at least 2 meters while using the device for the first
time. Due to air bubbles burning out of the lava rocks, the rocks may jump up lightly.
When you want to move or clean up the lava rocks and ceramic logs, always make sure that they have cooled
down completely.
The lava rocks and logs can scorch black in time. This has to do with soot formation which always occurs in devices
that show a yellow flame. This soot can be removed by blowing / vacuuming with a vacuum cleaner. The soot
may also be brushed off with a dry brush.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cosi Cosibrixx 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cosi Cosibrixx 90 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info