588217
11
Zoom out
Zoom in
Previous page
1/43
Next page
11
6. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged
in any way; take it to a qualified serviceman.
7. Do not disassemble charger; take it to a qualified serviceman when service or repair is
required. Incorrect reassembly may result in a risk of electric shock or fire.
8. To reduce risk of electric shock, unplug charger from outlet before attempting any
maintenance or cleaning.
4.WARNING -RISK OF EXPLOSIVE GASES.
a. Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases
during normal battery operation. For this reason, it is of utmost importance that each time
before using your charger, you read this and follow the instructions exactly.
b. To reduce the risk of the battery explosion, follow these instructions and those published by
battery manufacturer and manufacturer of any equipment you intend to use in vicinity of battery.
Review cautionary markings on these products and on engine.
5. PERSONAL PRECAUTIONS
a. Someone should be within range of your voice, or close enough to come to your aid, when
you work near a lead-acid battery.
b. Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or
eyes.
c. Wear complete eye protection and clothing protection. Avoid touching eyes while working
near battery.
d. If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters
eye, immediately flood with running cold water for at least 10 minutes and get medical attention
immediately.
e. NEVER smoke or allow a spark or flame in vicinity of battery or engine.
f. Be extra cautious to reduce risk of dropping a metal tool onto battery. lt might spark or short-
circuit battery or other electrical part that may cause an explosion.
g. Remove personal metal items such as rings, bracelets, necklaces, and watches when working
near a lead-acid battery. A lead-acid battery can produce a short-circuit current high enough to
weld a ring or the like to metal, causing a severe burn.
h. Use this charger for charging LEAD-ACID batteries only. lt is not intended to supply power
to a low voltage electrical system other than in an automotive application. Do not use battery
charger for charging dry-cell batteries that are commonly used with home appliances. These
batteries may burst and cause injury to persons and damage to property.
i. NEVER charge a frozen battery.
6. PREPARING TO CHARGE BATTERY
a.If it becomes necessary to remove the battery from the vehicle to charge, always remove
grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not
to cause an arc.
b. Be sure area around battery is well ventilated while battery is being charged. Gases can be
forcefully blown away, by using a piece of cardboard or other nonmetallic material such as a
fan.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cornutech 100602-1206CS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cornutech 100602-1206CS in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info