601727
2
Zoom out
Zoom in
Previous page
1/2
Next page
Probleem oplossingen
Geen snelheidsaanduiding (KMH)
op display
Is de spaakmagneet goed gemonteerd?
Is de wielomtrek goed ingesteld?
Is de computer goed in de houder
bevestigd?
Oxidatie van batterijen of contacten?
Kabelbreuk?
Afstand van de magneet en sensor in
orde (max 5mm)?
Is de magneet nog gemagnetiseerd?
Display geeft geen beeld
Batterij in orde?
Batterij goed gemonteerd?
Opletten +/-!
Batterij contacten in orde, zonodig
voorzichtig bijbuigen.
KMH/MPH klopt niet
2 magneten gemonteerd?
Magneet goed gemonteerd?
Wielomtrek goed ingesteld?
Display is zwart
V
erschijnsel treedt alleen op bij directe
zonnestraling boven 40º C.
Bij afkoeling weer normaal!
Display is traag
Alleen bij temperatuur onder 0º C.
Bij hogere temperatuur weer normaal!
Problem solutions
No speed display
Is the magnet mounted in the right
position?
Is the entered wheel size correct?
Is the computer properly placed in
the bracket?
Check the contacts for oxidation/
corrosion
Check the cable for damage.
Distance magnet and sensor
(max 5mm/0,2 inch)
Is the magnet magnetizised?
Display is empty
Check the battery.
Battery in right position?
Pay attention to +/-!
Check contacts, bend if necessary
.
KMH/MPH display is wrong
Are 2 magnets assembled?
Is magnet positioned in the right way?
Did you enter the correct wheel size?
Display is black
Only in direct sunlight (above 40º C).
Under 40º C the display will return
to normal.
Display is sluggish
Only at temperatur below 0º C.
Display will return normal after warm up.
www
.cordo.nl
Cordo is de lijn fietsaccessoires van AGU BV, Alkmaar - Nederland
AC knop
De AC knop bevind zich op de
achterzijde van uw Cordo CRD S
fietscomputer. Door het met een
puntig voorwerp indrukken van
deze knop worden alle instellingen
gewist. Deze handeling alleen
verrichten wanneer de fietscomputer
nergens meer op reageert.
AC button
The AC button is located at the
rearside of your Cordo CRD S
bicycle computer
P
ressing the AC botton with a
pointed tool will delete all settings.
This reset should only be carried
out if a faulty or no display
indicator appears.
T
otale afstand
(
handmatig in te stellen na
h
et wisselen van de batterij)
Druk kort op de MODE knop tot
O
DO verschijnt.
Totale afstand registreert tot 99.999 km.
H
oud de MODE knop 3 sec. ingedrukt
om de totaal afstand in te stellen.
Door MODE kort in te drukken kunt
u
deze waarde per cijfer wijzigen.
De km stand invoeren (na 9 volgt 0);
het te wijzigen cijfer knippert.
Door MODE ingedrukt te houden komt
u
bij het volgende cijfer.
Door MODE ingedrukt te
houden wordt de ingevoerde waarde
opgeslagen.
T
otal distance
(
manual adjustable in
c
ase of battery change)
Press MODE briefly until ODO
a
ppears.
Total distance up to 99.999 km.
P
r
ess MODE for 3 sec. to enter the
total distance.
P
ress MODE briefly to alter digits.
E
nter the actual time
(after 9 comes 0); digit is blinking.
Press MODE to select next digit.
Press MODE to save the setting.
T
rip afstand
Druk kort op de MODE knop tot DST
v
erschijnt.
Trip afstand registreert tot 99.999 km.
Houd de MODE knop 1 sec. ingedrukt
o
m de totaal afstand op nul te stellen.
T
rip distance
Press MODE briefly until DTS
a
ppears.
Trip distance up to 99.999 km.
Press MODE for 1 sec. to set DTS to
z
ero.
R
ittijd
Druk kort op de MODE knop tot ATM
v
erschijnt.
Rittijd registreert tot 9:59:59.
Houd de MODE knop 1 sec. ingedrukt
o
m de rittijd op nul te stellen.
R
iding time
Press MODE briefly until ATM
a
ppears.
Riding time up to 9:59:59.
Press MODE for 1 sec. to set ATM to
z
ero.
Instellen van de klok
Druk 1 sec. op de MODE knop tot
(
KLOK symbool) verschijnt.
Houd de MODE knop 3 sec.
ingedrukt om de tijd in te stellen.
Door MODE kort in te drukken kunt
u
deze waarde per cijfer wijzigen.
De juiste tijd invoeren (na 9 volgt 0);
het te wijzigen cijfer knippert.
Door MODE ingedrukt te houden
k
omt u bij het volgende cijfer.
Door MODE ingedrukt te houden wordt
de ingevoerde waarde opgeslagen.
Set clock
Press MODE 1 sec. until
(
KLOK symbool) appears.
Press MODE for 3 sec. to set the
time.
Press MODE briefly to alter digits.
Enter the actual time
(
after 9 comes 0) digit is blinking.
Press MODE to select next digit.
Press MODE to save the setting.
C
ordo CRD S (NL)
fietscomputer instellen
Ingebruikname door het plaatsen van
de batterij
Snelheid en wielomtrek
KMH knippert in de display
Druk kort op de MODE knop om de
s
nelheidsinstelling KMH of MPH te
s
electeren.
MODE 1 sec. ingedrukt houden om de
w
ielomtrek in mm. in te stellen
Display toont de standaard instelling
v
an de wielomtrek.
In “Wielmaat tabel” uw juiste
bandenmaat zoeken.
Door MODE kort in te drukken kunt u
deze waarde per cijfer wijzigen.
De juiste omtrek in mm aangeven
(
na 9 volgt 0) het te wijzigen cijfer
knippert.
Door MODE 1 sec. ingedrukt te houden
k
omt u bij het volgende cijfer.
Door MODE 1 sec. ingedrukt te
h
ouden wordt de ingevoerde waarde
opgeslagen.
C
ordo CRD S (ENG)
bicycle computer instructions
Startup by inserting the battery
Speedscale and tyre circumference
KMH sign is blinking.
Press MODE briefly to select KMH
or MPH.
Press MODE for 1 sec. to enter the
t
yre circumference in mm.
The display shows the input standard
o
f wheel size.
Find out the number corresponding
t
o your wheel size out the “Wheel Size
C
hart”.
Press MODE briefly to alter digits.
Circumference should be entered in
mm (after 9 comes 0) digit is blinking.
Press MODE for 1 sec. to select next
d
igit.
Press MODE for 1 sec. to save the
setting.
ATM
W
ielmaat tabel / Wheel Size Chart
DST
ODO
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cordo CRD S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cordo CRD S in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info