21940
17
Zoom out
Zoom in
Previous page
1/23
Next page
38
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer.
Before contacting your local Service Force Centre, please carry out the checks listed below.
RIM05en
Something not working
Symptom Solution
The machine will not start The door has not been properly closed.
The plug is not properly inserted in the power socket.
There is no current at the socket.
The machine does not fill Ensure the water tap is open.
with water Ensure the mains water supply has not been cut off.
The inlet hose may be squashed or bent. Reposition the hose.
The inlet hose may be blocked. Switch off the water supply
and clean the filter.
The filters are blocked Clean the filters (refer to "Maintenance and cleaning").
The spray arms are not rotating Ensure the crockery is loaded correctly.
The dishwasher will not drain The drain hose may be squashed or bent.
Reposition the hose.
The sink may be blocked. Clear any blockages.
The drain hose extension is not correct. Follow the
instructions for connecting to the waste.
There is no vent in the end of the drain hose.
The machine is noisy Dishes are rattling against each other, refer to “Loading
your machine”.
The spray arms are knocking against the dishes. Refer to
"Loading your machine".
The door is difficult to close The dishwasher is not level, or not properly built-in.
Visible lime deposits or white Check that there is salt and that the salt cap is tight.
film on the dishes Check that the right level of the water softener is setted.
The dishes are not quite dry The rinse aid has run out or too little is being used.
The dishes are not clean The baskets are too full.
(poor wash) The dishes have not been arranged properly.
The spray arms do not rotate
The spray arms are clogged.
The filters are clogged.
Then filters are not in position.
Not enough detergent has been used or it is unsuitable.
The detergent is old or has gone hard.
The salt container cap is not properly closed.
The washing programme selected is too gentle.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Corbero LV6063 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Corbero LV6063 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Corbero LV6063

Corbero LV6063 User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info