751432
21
Zoom out
Zoom in
Previous page
1/30
Next page
EN - 17
7. THE CONTROL PANEL
Press the Power On/Off button (1), the
Start/Pause light (6) will illuminate.
Select the programme most suitable for
your dishes using the Programme Selection
button (4).
Additional functions (2, 3) can also be
selected.
NOTE: Press the Extra Hygiene button
(2) to change the washing temperature and
durations during respective cycles, ensuring
more hygienic washing.
NOTE: Press the Tablet Detergent
button (3) when using a combined
detergent that contains salt, rinse aid or
other extras.
NOTE: Press the Half Load button (5)
to reduce the duration of a programme, and
therefore decrease your energy and water
consumption.
NOTE: If an extra feature has been
used on the most recent wash programme,
this feature will remain active on the next
selected programme. If you do not want to
use this feature on the newly selected wash
programme, press the feature button until
the light on the button switches off.
Press the Start/Pause button (6) to start
the selected programme. The light on the
Start/Pause button will switch off and the
Wash light (8) will illuminate. If the door of
your machine is opened while a programme
is operating, the Start/Pause light (6) will
flash.
The Wash, Dry and End lights (8) on the
Control Panel indicate the status of the
Press the Start/
Pause button once.
programme in operation. The machine will
remain silent for 40 to 50 minutes while the
Drying light is on.
The Remaining
Time Indicator (9) displays
the programme times and the time
remaining of the programme in operation.
NOTE: When there is insufficient
softening salt, the Salt Lack Warning
Indicator (7) will illuminate indicating the salt
chamber needs filling.
NOTE: When there is insufficient rinse
aid, the Rinse Aid Lack Warning Indicator
(7) will illuiminate to indicate the rinse aid
chamber needs filling.
Delaying a Programme
Press the "+" and "-" buttons on the
Remaining Time Indicator to adjust
the programme delay time before the
programme starts. To change the delay
time, first press the Start/Pause button, then
use the "+" and "-" buttons to select a new
delay time. To activate the new delay time,
press the Start/Pause button.
Child Lock
Press “-” and “+” buttons simultane-ously for
3 seconds to activate Child Lock. At that
time, on the remaining time indicator, “CL” is
displayed for 2 seconds. To deacti-vate this
function, again, press “-” and “+” buttons
simultane-ously for 3 sec-onds. “CL” will
flash twice.
7.1. Changing a Programme
Follow the steps below to change a
programme while in operation.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Corbero CLV6600X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Corbero CLV6600X in the language / languages: English as an attachment in your email.

The manual is 8,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Corbero CLV6600X

Corbero CLV6600X User Manual - Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info