667141
6
Zoom out
Zoom in
Previous page
1/20
Next page
User instructions 15 – 30 – 40 EN
6
Menu structure
By pressing the set/reset button in for longer than 5 seconds, you go to the ‘mode’ menu.
To change the subsequent "Letter" parameter, the user must press the Set/Reset button.
To change the “Range” setting in the parameter, the user must press the “+” or the “–“ button.
Letter Description Range
Factory
setting
Field of
application
C
max. set point of central heating 25°C - 90°C 82°C
O
Central heating post-running time 1 - 25 min, CO = 24 hours 5 min
P
Max central heating capacity 33 – 100 % 80 %
H
Type of application
0 = central heating unit
1 = combi-unit (internal HWS cylinder)
2 = for external HWS cylinder 12kOhm
3 = for external HWS cylinder 10kOhm
4 and 5 = all functions are blocked
unit-
dependent
unit-
dependent
d
HWS temperature 40°C -65°C 60°C
t
Hold temperature 40 - 50°C 40°C
Combi-unit
b
Set point for storage HWS cylinder 40°C -70°C 60°C
external storage
vessel
O/b
Basic temperature
External characteristic
10 -70°C 20°C
O/S
Slope
External characteristic
1-100 20
O/d
Day reference temperature 0°C -70°C 20°C
These three
settings are
only active
when an
external sensor
is connected
r
Factory setting
= Factory setting
= Changed factory setting
If you switch back to the factory
setting, this has no effect on the
H, S and P/S settings
S
Pump speed
00 = automatic
= always high
= always low
00 =
automatic
P/S
Maximum pressure jump
= 0.54
= 0.53
= 0.52
= 0.54
In the View mode, you can read the actual values of:
8 = Water pressure (in bar)
1 = Flow temperature (in °C)
2 = Return temperature (in °C)
3 = Inlet cold water temperature / HWS sensor (in °C)
4 = External temperature (in °C)
5 = Outside temperature (in °C)
6 = Flue gas temperature (in °C)
7 = Flame signal (in µA DC)
9 = Last interlock
A = Last blocking
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Coopra 15B-2004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Coopra 15B-2004 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info