100886

Cool-Icam CIC220 Manual

20
Zoom out
Zoom in
Previous page
1/24
Next page
20
Making a call
5. Double click the “CU-SeeMe™” icon from the Cu-SeeMe™ folder.
6. Go to “Edit” and then “Preference”. Edit your settings, e.g. video title, connection settings, etc.
7. Go to “Conference” and click “Connect”. Type in the Hostname and IP address for the person you want
to call and press “Connect”.
8. To find your own IP address, go to “Control Panel” and then “File Sharing”. You will be able to see your
IP address under the “Start/Stop” partition.
9. For further help on how to use CU-SeeMe™, you can visit the following website: http://
www.cuseeme.com
6 Troubleshooting Problems
• Troubleshooting
The troubleshooting guide is designed to help you. If problems continue, please contact your local
customer support hot-line. See your registration card for helpline contact details.
For Windows® Users
PC
My CD Installation wizard does
not work.
Symptom
Solution
Problem
I receive an error message when I
am installing the Digital Camera
Manager.
Digital Camera Manager folder
is not found in the Programs menu
after I have installed the driver.
All the images I have taken do not
appear on the AQUA-CAM.
LCD display is ashing.
I cannot run the Digital Camera
Manager.
I hear a low “beep” when trying to
take an image.
I cannot access any Arcsoft
Funhouse’s templates.
Shut down all other applications and attempt to
re-install the driver, or download the updated
driver from www.coolicam.com and install the
updated driver.
Check the USB controller in your BIOS if they are
activated. If these does not work contact your
national Customer Support representative.
Install the software, restart your PC, and nally,
connect the AQUA-CAM to the PC via the USB
port, then the software folder will appear in the
Program menu.
Upload all images to your PC as soon as possible.
(please refer to Battery Guidance section in
User’s Manual.)
If you need to change batteries, and retain the
images in your AQUA-CAM’s memory, ensure
you are connected to a PC which is turned on via
the USB cable, which will then draw power from
the PC whilst you insert fresh batteries.
Check all cables connections are secured.
Upload saved images immediately, then replace
battery.
Take picture in sufcient light.
Use the ash light to take the photograph.
If you have any other camera installed on your
computer, remove the camera and it’s driver
completely from your system to avoid conict
with another camera or capture device.
Put Digital Camera CD in CD ROM drive.
Digital Camera Manager does
not load.
You have lost power to your AQUA-CAM by either:
The installer for the Digital
Camera Manager requires the
AQUA-CAM be connected to the
PC (via the USB) after the software
has been installed & the PC
restarted.
Insufficient battery power
Battery power is too low to
continue taking images.
Connection failure
Removing the battery without
being connected to your PC
(turned on) via the USB cable.
Conict with another camera driver
capture device.
Insufcient light.
The auto installation le is
switched to off.
or
The CD-ROM is disconnected.
No CD in CD-ROM drive.
Go to the computer desktop. Right click on “My
Computer”. Click “Properties”. Select “Device
Manager”. Double click on “CD-ROM”, double
click on “CD-R” (normally the manufacturer’s
name). Click on “Settings”. Ensure “Auto insert
notication” is ticked and the “disconnect” is
ticked. If you change the settings the computer
will ask you to restart your PC. Click “Yes”.
I cannot upload images to the PC
Please also refer to the help files & User Guides that accompany the enclosed applications.
For further information and support, please visit our website: http://www.coolicam.com
Downloaded from www.Manualslib.com manuals search engine
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cool-Icam CIC220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cool-Icam CIC220 in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info