498150

Cool-Icam CIC150 Manual

22
Zoom out
Zoom in
Previous page
1/24
Next page
22
For Macintosh® Users:
MAC
I hear a low “beep” when trying to
take an image.
Take your images in better light condition.
Check your lens cover is open.
Put Digital Cam CD in the CD-ROM drive.
Insufcient light.
No CD in CD-ROM drive.
If you need to change batteries, and retain the
images in your Micro C@m ’s memory, ensure you
are connected to a Mac which is turned on via the
USB cable, which will then draw power from the Mac
whilst you insert fresh batteries.
This means there is insufcient
power to upload images to your
computer.
I receive an error message when I
am installing the Digital Camera
Manager.
“STV0680 Capture”/”WWL Mac
Import” plug-in le and sTV0680
Camera Snapshots”/”WWL Mac”
folder is not found in the Programs
menu after I have installed the
driver.
Digital Camera Manager does
not load.
The installer for the Digital
Camera Manager requires the
Micro C@m be connected to
the Mac (via the USB) after the
software has been installed & the
Mac restarted.
Install the software, restart your Mac, and nally,
connect the Micro C@m to the Mac via the USB
port, then the plug-in le and folder will appear in
the Hard disk.
You have lost power to your Micro C@m by either:All the images I have taken do not
appear on the Micro C@m.
I cannot upload images to the
Mac
LCD display is ashing.
Insufcient battery power
Removing the battery without
being connected to your Mac
(turned on) via the USB cable.
Connection failure
I cannot run the USB Canera
Import / WWL Mac Import.
Black corner appears on the
images taken.
My Micro C@m LCD displays
“SE”.
I cannot access any Funhouse’s
templates.
Battery power is too low to
continue taking images.
Conict with another camera driver
capture device.
Lost corner of images. Make sure you slide the lens cover to the desired
position.
If you have any other camera installed on your
computer, remove the camera and it’s driver
completely from your system to avoid conict with
another camera or capture device.
Upload saved images immediately, then replace
battery.
Check all cables connections are secured.
If you need to change batteries, and retain the
images in your Micro C@m’s memory, ensure you
are connected to a Mac which is turned on via the
USB cable, which will then draw power from the Mac
whilst you insert fresh batteries.
Upload all images to your Mac as soon as possible.
(please refer to Battery Guidance section in User’s
Manual.)
Symptom Solution Problem
Shut down all other applications and attempt to re-
install the driver, or download the updated driver
from www.cool-icam.com and install the updated
driver.
Please also refer to the help les & User Guides that accompany the enclosed applications.
For further information and support, please visit our website: http://www.cool-icam.com.
Downloaded from www.Manualslib.com manuals search engine
… 22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cool-Icam CIC150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cool-Icam CIC150 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info