609490
65
Zoom out
Zoom in
Previous page
1/100
Next page
65
Other components
5. Adjust the handlebar direction so that the handlebars
are positioned at a 90° angle to the front wheel
(see Fig. “Handlebar direction”).
6. Tighten the two screws on the handlebar stem, while still
taking the torques into consideration.
7. Replace the cap on the handlebar stem.
9.1.3.6 Quill handlebar stem
1. Remove the cap on the top of the quill stem in an upwards
direction (see Fig. “Handlebar stems”, right).
2. Unscrew the internal screw with 1 to 2 turns in an anti-
clockwise direction.
3. Adjust the handlebar direction so that the handlebars
are positioned at a 90° angle to the front wheel
(see Fig. “Handlebar direction”).
4. Turn the interior screw in a clockwise direction, while still
taking the torques into consideration.
5. Replace the cap on the quill handlebar stem.
9.1.3.7 Adjusting the head bearing
You will need two open-ended spanners or two headset
spanners; the spanner size may vary between individual
bicycle models.
1. Place the bicycle in an upright position.
2. Loosen the clamping nuts.
3. Tighten the bearing until there is no play in the head bearing.
Engage the front wheel brake and move the bicycle
backwards and forwards.
Check whether there is any play in the head bearing.
Lift the bicycle and check to see if the front wheel turns
towards the left or right of its own accord if you hold the
frame at an angle.
If no amount of play can be detected in the head bearing when
checked and if the front wheel turns to the left or right as the
frame is moved, this means that the head bearing is correctly
adjusted.
4. Re-tighten the counter nuts, taking into account the torques;
avoid turning the bearing with the nut by holding it in position
with another spanner.
5. Check the handlebar direction after adjusting the steering
head bearing (see Fig. “Handlebar direction”).
Fig.: Head bearing
1 Counter nut 2 Bearing
1
2
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conway MOUNTAINBIKE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conway MOUNTAINBIKE in the language / languages: English as an attachment in your email.

The manual is 26.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Conway MOUNTAINBIKE

Conway MOUNTAINBIKE User Manual - German - 47 pages

Conway MOUNTAINBIKE User Manual - Dutch - 100 pages

Conway MOUNTAINBIKE User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info