470078
6
Zoom out
Zoom in
Previous page
1/12
Next page
1
5
3
TIMER
SWING
POWER
SPEED
COOL
CONTROL PANEL
Warning: Do not operate the cooler
with the cooling pads or grilles
removed
USING THE CONTROLPANEL
Power ON/OFF
Speed Control
Cooling
.
Plug the cooler in to a power outlet. The
cooler will be in stand-by mode (the
cooler will beep and the amber
coloured POWER symbol will be lit),
ready for operation.
The cooler’s control panel has a ‘touch’
sensitive panel. All buttons can be
operated by lightly touching them.
To turn on the unit, touch POWER
button. The ‘blue’ outer circle will light,
the TIMER will display 0.0 and the fan
will come on at HIGH speed for 2
seconds and then change to LOW
speed.
To turn off the cooler, touch the POWER
button for 2 seconds until the cooler
shuts off.
Touch the SPEED button to change the
fan speed between LOW ( ) and
HIGH ( ) speed settings.
To use as an evaporative air cooler,
touch the COOL button on the control
panel. The pump will turn on and
distribute water to the cooling media.
Note!
Low Water Level Warning
Swing Function
Note!
Maximum cooling will not be
achieved until the wetting media is fully
saturated. This may take several
minutes.
The cooler can be operated in FAN only
mode by turning cooling off at any time.
Your cooler is equipped with a low
water level warning function. When in
COOL mode and water is below the
minimum level, a warning sound will
beep for a few seconds and the COOL
symbol will flash continuously. The
water pump will shut off to protect itself
from damage. The COOL function
cannot be selected until reset.
To reset, refill the water tank with fresh
water. The COOL symbol will
disappear and turn on the COOL
function to enjoy the cool air again.
Touch the SWING button on the control
panel to turn on the automatic swing
function. The SWING symbol
will be lit and the louvres will begin to
move from side to side in a horizontal
direction. Vertical direction of
the air flow is preset and cannot be
adjusted.
OPERATINGINSTRUCTIONS
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Convair SI 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Convair SI 4000 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info