574406
17
Zoom out
Zoom in
Previous page
1/27
Next page
Medical Test Supply www.medicaltestsupply.com
15
Measurement Limitations
During operation, the accuracy of oximeter readings can be affected by:
High-frequency electrical noise, including noise created by the host system, or noise from
external sources, such as electrosurgical apparatus connected to the system.
Intravascular dye injections.
Excessive patient movement.
External light radiation.
Improper sensor installation or incorrect contact position of the patient.
SpO
2
probe temperature (optimal temperature between 28°C and 40°C).
Placement of the SpO
2
probe on an extremity that has a blood pressure cuff, arterial catheter,
or intravascular line.
Significant concentrations of dysfunctional hemoglobin, such as carboxyhemoglobin and
methemoglobin.
SpO
2
too low.
Bad circular injection of the part being measured.
It is required to use SpO
2
probe which is provided by our company, contact with our sale
department when changes SpO
2
probe.
Chapter15 Maintenance and Cleaning
Warning
Take cuff and the power source off before cleaning the unit or the SpO
2
probe.
Caution
Do not subject the sensor to autoclaving.
Do not immerse the SpO
2
probe into any liquid.
Do not use any SpO
2
probe or cable that may be damaged or deteriorated.
Cleaning:
Use a cotton ball or a soft mull moistened with hospital-grade ethanol to wipe the surface of
the SpO
2
probe, and then dry it with a cloth. This cleaning method can also be applied to the
luminotron and receiving unit.
The cable can be cleaned with 3% hydrogen dioxide, 70% isopropanol, or other active
reagent. However, connector of the SpO
2
probe shall not be subjected to such solution.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Contec CMS-08A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Contec CMS-08A in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info