100861
187
Zoom out
Zoom in
Previous page
1/197
Next page
Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-187
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
The number of
available shots
did not increase
after I erased an
image.
This is because the erased
image size was small.
This is dependent on factors
such as the number of pixels
and the subject and is not a
problem.
-
I cannot charge
the battery.
There is no lithium-ion
battery pack loaded in the
camera.
Load a lithium-ion battery pack
into the camera. 25
The lithium-ion battery pack
poles (+ and -) are the wrong
way round.
Reload the lithium-ion battery
pack correctly. 25
The AC adapter is not
connected correctly.
Make sure the cradle and power
outlet are securely connected.
27
The battery pack terminals
are soiled.
Wipe the terminals with a soft
clean cloth.
-
I cannot charge
the battery. Or
charging stops.
The caution LED
flashes slowly.
The charging protection
circuit was activated and
halted charging because the
ambient temperature is too
high or too low.
Charge the battery when the
ambient temperature is between
10°C and 30°C. (Charging is
possible between 5°C and 40°C
but will take slightly longer.)
-
The camera
feels hot.
Because the LCD monitor
uses relatively large amounts
of current, the camera grows
warm after prolonged use.
This is not a problem, but you
should shut the camera down for
a few minutes.
-
The caution LED
flashes slowly.
The flash is charging. Briefly take your finger off the
shutter release button and wait.
24
The caution LED
flashes quickly.
This is the camera shake
warning. The shutter speed
is slow.
Place the camera on a stable
surface to take the picture. 24
The camera will
not focus. The
shooting mark
flashes.
The subject is a type that is
not suited to auto focus.
Use focus lock to focus on a
strongly contrasting part of the
subject, then compose the shot
and take the picture.
72
Problem Cause Solution Page
187


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Contax I4R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Contax I4R in the language / languages: English as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info