100861
68
Zoom out
Zoom in
Previous page
1/197
Next page
Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-68
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[METERING] Selecting the Area Used for Setting the
Exposure
«Applicable mode: C»
In this mode, you can select the area that the camera uses to set the
exposure
. The available settings are [EVALUATION], [CENTER] and [SPOT
AREA]. Use the setting that best suits your subject.
[EVALUATION] : The screen is partitioned into zones and the optimum exposure is determined based on
measurements of the light in each zone. Because this mode allows ordinary shots or even
backlit shots to be taken with little or no exposure compensation, it is recommended for
novices or for users who want to take pictures without having to worry about the exposure
settings.
[CENTER] : The exposure is determined by giving particular weight to measurements of the light from the
subject that strikes the central part of the screen. This mode makes it easy for the camera to
set the exposure even in shots where there is a strong light source close to the subject.
[SPOT AREA] : The camera determines the exposure by measuring only the light from the subject that strikes
the center of the screen. This mode should be used for shots where there is a strong contrast
in brightness between the subject and the background, such as a backlit portrait or a shot of a
performance where the lighting is focused on a specific part of the stage. You can also use
this mode to measure the light from a particular part of your subject when you are trying to
achieve a specific effect.
1 Turn the camera on and press the mode
button until "C" lights up on the mode
select LED.
2 Press the MENU button K to display the menu icons.
Area measured in [EVALUATION] mode
Measures by splitting the entire screen into zones.
Area measured in [CENTER] mode
Measures the central part of the screen.
Area measured in [SPOT AREA] mode
Only measures a single point in the center of the screen.
(A
rea measure
d)
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Contax I4R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Contax I4R in the language / languages: English as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info