Manual Constructa CN161152 (page 21 of 56) (English, German, Dutch, French)

596516

Zoom out

Zoom in

1/56

Cleaning agents

Caution!

Before cleaning, unplug the appliance from the mains or switch

off the circuit breaker in the fuse box. Clean the outside of the

appliance and the cooking compartment with a damp cloth and

mild detergent. Dry with a clean cloth.

Malfunction table

Malfunctions often have simple explanations. Please refer to the

malfunction table before calling the after-sales service.

If a meal does not turn out exactly as you wanted, refer to the

Tested for you in our cooking studio section, where you will

find plenty of cooking tips and tricks.

: Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried

out by one of our trained after-sales engineers.

You can take remedial action yourself for some error

messages.

Troubleshooting

Area Cleaning agents

Appliance front Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Do not use glass cleaners or

metal or glass scrapers for cleaning.

Cooking compart-

ment made of stain-

less steel

Hot soapy water or a vinegar solution:

Clean with a dish cloth and dry with a

soft cloth.

If the oven is very dirty: use oven

cleaner, but only when cooking com-

partment is cold. It is best to use a stain-

less-steel sponge. Do not use oven

spray or other aggressive oven cleaners

or abrasive materials. Scouring pads,

rough sponges and pan cleaners are

also unsuitable. These items scratch the

surface. Allow the interior surfaces to

dry thoroughly.

Recess in cooking

compartment

Damp cloth:

Ensure that no water seeps through the

turntable drive into the appliance inte-

rior.

Turntable and turnta-

ble ring

Hot soapy water:

When putting the turntable back in

place, make sure it slots in correctly.

Door panels Glass cleaner:

Clean with a dish cloth. Do not use a

glass scraper.

Seal Hot soapy water:

Clean with a dish cloth, do not scour. Do

not use a metal or glass scraper for

cleaning.

Appliance front with

stainless steel

Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Remove flecks of limescale,

grease, starch and albumin (e.g. egg

white) immediately. Corrosion can form

under such residues. Special stainless

steel cleaning agents can be obtained

from the after-sales service or from spe-

cialist shops. Do not use glass cleaners

or metal or glass scrapers for cleaning.

Area Cleaning agents

Error message Possible cause Remedy/Note

The appliance does not work The plug is not plugged into the mains. Plug the plug in

Power cut Check whether the kitchen light works.

Faulty circuit breaker Look in the fuse box and check that the cir-

cuit breaker for the appliance is in working

order.

Incorrect operation Switch off the circuit breaker in the fuse

box. Reconnect it after approx.

10 seconds.

Three zeros flash in the display. Power cut Reset the time.

The appliance is not in operation. A

cooking time appears in the display.

The rotary selector was accidentally pressed. Press the „ button.

After making the setting, the ƒ button was not

pressed.

Press the ƒ button or clear the setting with

the „ button.

The microwave does not work. The door was not fully closed. Check whether food remains or foreign

material is trapped in the door.

The ƒ button was not pressed. Press the ƒ button.

The food takes longer than usual to

heat up

The microwave power setting was too low. Select a higher microwave power setting.

You have placed a larger amount of food than

normal in the appliance.

Double the amount = double the cooking

time.

The food was colder than usual. Stir or turn the food during cooking.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CN161152 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa CN161152 Manual

Product: