542393
20
Zoom out
Zoom in
Previous page
1/56
Next page
20
Setting the microwave
Example: microwave power setting 600 W
1.Press the required microwave power setting.
The selected microwave power setting lights up in the
display, and "1:00 min" appears.
2.Set a cooking time using the rotary selector.
3.Press the "start" button.
The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. Open the appliance door or press "stop". The
clock reappears.
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Pausing
Press the "stop" button once, or open the appliance door. After
closing the door, press the "start" button again.
Cancelling
Press the "stop" button twice, or open the door and press the
"stop" button once.
Note: You can also adjust the cooking time first and then the
microwave power setting.
Cooling fan
The appliance is equipped with a cooling fan. The fan may run
on even if the oven has been switched off.
Notes
The cooking compartment remains cold during microwave
operation. The cooling fan will still switch on. The fan may run
on even when microwave operation has ended.
Condensation may appear on the door window, interior walls
and floor. This is normal and does not adversely affect
microwave operation. Wipe away the condensation after
cooking.
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving memory settings
Example: 360 W, 25 minutes
1.Press the i button.
"M" appears in the display.
2.Press the required microwave power setting.
"M", the selected power setting and "1:00 min" appear in the
display.
3.Set the cooking time using the rotary selector.
4.Confirm by pressing the i button.
The clock reappears. The setting is saved.
Notes
You cannot save several microwave power settings one after
the other.
You cannot save automatic programmes.
You can save the memory settings and start the appliance
immediately. When finishing, instead of pressing i, press
"start".
Saving a new setting in the memory: press the i button.
The old settings appear. Save the new programme as
described in steps 1-4.
Starting the memory
It is very easy to start the saved programme. Place your meal
into the appliance. Close the appliance door.
1.Press the i button.
The saved settings are displayed.
2.Press the "start" button.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press "stop". The
clock reappears.
Pausing
Press the "stop" button once, or open the appliance door. After
closing the door, press the "start" button again.
Cancelling
Press the "stop" button twice, or open the door and press the
"stop" button once.
 
VWRS
   
VWDUW

PLQ
NJ
L
J


VWRS
   
VWDUW
L
J
PLQ
NJ

20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa CN161151 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CN161151 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Constructa CN161151

Constructa CN161151 User Manual - Danish - 16 pages

Constructa CN161151 User Manual - Italian - 16 pages

Constructa CN161151 User Manual - Polish - 16 pages

Constructa CN161151 User Manual - Portuguese - 16 pages

Constructa CN161151 User Manual - Swedish - 16 pages

Constructa CN161151 User Manual - Spanish - 16 pages

Constructa CN161151 User Manual - Norwegian - 16 pages

Constructa CN161151 User Manual - Finnish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info