Manual Constructa CH236253 (page 67 of 72) (English, German, Dutch, French)

596503

Zoom out

Zoom in

1/72

Removing and fitting the appliance door

You can remove the appliance door to clean it more

thoroughly.

: Risk of injury!

The hinges of the appliance door may snap shut with great

force. Always open the hinge locking lever fully when removing

the appliance door and close it fully after refitting. Do not reach

into the hinge.

: Risk of injury!

If the appliance door has only been unhinged on one side, do

not reach into the hinge. The hinge can snap back with great

force. Call the aftersales service.

Removing the appliance door

1. Open the appliance door fully.

2. Open the locking levers on the left and right-hand side fully.

The hinges are secured and cannot snap closed.

3. Close the appliance door until resistance becomes

noticeable (figure A).

4. With both hands, grip the door on the left and right-hand side,

close the door a little more and pull it out (figure B).

Fitting the appliance door

1. Insert the hinges in the left and right-hand holders (figure C).

The notch on both hinges must engage.

2. Open the appliance door fully.

3. Close the locking levers on the left and right-hand side fully

(figure D).

The appliance door is secured and can no longer be

removed.

4. Close the appliance door.

Cleaning the door panels

To facilitate cleaning, you can remove the inner door panels

from the appliance door.

: Risk of injury!

The components inside the appliance door may have sharp

edges. Take care not to cut yourself. Wear protective gloves.

: Risk of injury!

The appliance must not be used again until the door panels

and appliance door have been correctly fitted.

Removing the door panel

Note: Before removing, make a note of which way round the

door panel is fitted, so that it is not refitted the wrong way

round.

1. Unhook the appliance door and lay it on a soft, clean surface

with the front side facing downwards (see section: Removing

and installing the appliance door).

2. Pull off the cover at the top of the appliance door. Press in

the tabs on the left and right using your fingers (fig.A).

3. Lift the door panel slightly and pull it out (Fig. B).

Removing the intermediate panel

Lift the intermediate panel slightly and pull it out towards you.

Cleaning

Clean the door panel with glass cleaner and a soft cloth.

: Risk of injury!

Scratched glass in the appliance door may develop into a

crack. Do not use a glass scraper, sharp or abrasive cleaning

aids or detergents.

$ %

& '

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CH236253 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa CH236253 Manual

Product: