Manual Constructa ch 110250 (page 37 of 40) (English, German, Dutch, French)

327717

Zoom out

Zoom in

1/40

Removing the appliance door

1. Open the appliance door fully.

2. Open the locking levers on the left and right-hand side fully.

The hinges are secured and cannot snap closed.

3. Close the appliance door until resistance becomes

noticeable (figure A)

4. With both hands, grip the door on the left and right-hand side,

close the door a little more and pull it out (figure B).

Fitting the appliance door

1. Insert the hinges in the left and right-hand holders (figure C).

The notch on both hinges must engage.

2. Open the appliance door fully.

3. Close the locking levers on the left and right-hand side fully

(figure D).

The appliance door is secured and can no longer be

removed.

4. Close the appliance door.

Cleaning the hook-in racks

You can remove the hook-in racks for easier cleaning.

m Risk of burning due to hot components in the cooking

compartment!

Wait until the cooking compartment has cooled down.

1. Push the hook-in rack upwards at the front and unhook to the

side (figure A).

2. Pull the hook-in rack forwards at the rear and unhook to the

side (figure B).

3. Clean the hook-in rack with washing-up liquid and a sponge

or brush.

4. Align the hook-in rack with the indentation (a) facing

downwards, so that the shelf heights match.

5. Insert the hook-in rack at the rear as far as it will go and push

to the rear (figure C).

6. Insert the hook-in rack at the front as far as it will go and

push downwards (figure D).

A B

C D

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa ch 110250 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa ch 110250 Manual

Product: