542809
20
Zoom out
Zoom in
Previous page
1/38
Next page
en Operating the appliance
20
1 Operating
the appliance
Operating the appliance
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. This data refers to
normal conditions and the water
hardness set value 2. Different
influencing factors such as water
temperature or mains pressure may
result in deviations.
Aqua sensor
Aqua sensor *
* depending on model
The Aqua sensor is an optical
measuring device (light barrier) which
measures the turbidity of the rinsing
water.
The Aqua sensor is used according to
the programme. If the Aqua sensor is
active, “clean” rinsing water can be
transferred to the next rinse bath and
water consumption can be reduced by
3–6 litres. If the turbidity is greater, the
water is drained and is replaced with
fresh water. In the automatic
programmes the temperature and
running time can also be adjusted to the
degree of soiling.
Switching on the appliance
1. Turn on the tap fully.
2. Open the door.
3. Switch on ON/OFF switch (.
The Eco 50° programme display
flashes. This programme remains
selected unless another programme
is selected with the button <
H or button > P.
4. Press the START button h.
5. Close the door.
The programme starts running.
Note
- for environmentally friendly operation
of the dishwasher:
For ecological reasons the Eco 50°
programme is preset whenever the
appliance starts. This conserves
environmental resources and not least
saves you money.
The Eco 50° programme is a
particularly environmentally friendly
programme. According to EU
regulation 1016/2010 it is the
“Standard programme” which is the
most efficient standard cleaning cycle
for cleaning normally soiled utensils in
terms of the combined energy and
water consumption for cleaning these
types of utensils.
Optical display while the programme is running
Optical display while
the programme is running *
* depending on model
While the programme is running, a light
spot shines on the floor under
the appliance door. Do not open
the dishwasher door until the light point
is no longer visible on the floor.
If the appliance is installed at eye-level,
with flush furniture front, the light point
is not visible.
Timer programming
Timer programming *
* depending on model
You can delay the start of the
programme by 3, 6 or 9 hours.
1. Switch on ON/OFF switch (.
2. Keep pressing the Preselected
starting time button 0 until the
appropriate display 3h, 6h or 9h is lit.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa CG5A03V9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CG5A03V9 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Constructa CG5A03V9

Constructa CG5A03V9 Quick start guide - English - 2 pages

Constructa CG5A03V9 Quick start guide - German - 2 pages

Constructa CG5A03V9 User Manual - German - 42 pages

Constructa CG5A03V9 Quick start guide - Dutch - 2 pages

Constructa CG5A03V9 Quick start guide - Danish - 2 pages

Constructa CG5A03V9 User Manual - Danish - 38 pages

Constructa CG5A03V9 Quick start guide - French - 2 pages

Constructa CG5A03V9 User Manual - French - 44 pages

Constructa CG5A03V9 Quick start guide - Italian - 2 pages

Constructa CG5A03V9 User Manual - Italian - 42 pages

Constructa CG5A03V9 Quick start guide - Polish - 2 pages

Constructa CG5A03V9 User Manual - Polish - 42 pages

Constructa CG5A03V9 Quick start guide - Portuguese - 2 pages

Constructa CG5A03V9 User Manual - Portuguese - 42 pages

Constructa CG5A03V9 Quick start guide - Swedish - 2 pages

Constructa CG5A03V9 User Manual - Swedish - 38 pages

Constructa CG5A03V9 Quick start guide - Spanish - 2 pages

Constructa CG5A03V9 User Manual - Spanish - 48 pages

Constructa CG5A03V9 Quick start guide - Finnish - 2 pages

Constructa CG5A03V9 User Manual - Finnish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info