Manual Constructa CG562J4 (page 22 of 26) (English)

596596

Zoom out

Zoom in

1/26

5600 052 316 (8210)

en Instructions for Use

Child lock *

* on applicable models

Please refer to the drawings enclosed in

the envelope

40 Engaging the child lock

41 Opening the door with the child lock

engaged

42 Disengaging the child lock

If a fault occurs

Repairs or other work on the

dishwasher should only be carried out

by a qualified specialist.

The dishwasher must be disconnected

from the electricity supply before any

repairs or other work are started. Pull

the mains plug out of the wall socket or

switch off at the fuse box. Grasp the

plug to remove it from the socket; do

not tug on the cable. Turn the water off

at the tap.

When disposing of old

appliances

Appliances that have reached the end

of their service life should be rendered

inoperable in order to exclude the

possibility of subsequent accidents. Pull

the mains plug out of the wall socket,

cut through the connecting cable and

disable the door lock.

Take the appliance to a designated

waste disposal centre.

Warning

Children could get locked in the appliance

(risk of suffocation) or get stuck in other

positions.

Therefore: Remove the mains plug, cut the

mains wire and set aside. Damage the

door lock so that the door can no longer

be closed.

Getting to know your

appliance

Diagrams of the control panel and the

interior of the appliance can be found

in the envelope at the front.

Individual positions are referred to in

the text.

Control panel

1 Main switch

2 Door handle

3 PROGRAMME END indicator

4 LOW SALT indicator *

5 LOW RINSE-AID indicator *

6 Programme buttons

* on applicable models

Appliance interior

Upper basket with 2-tiered cup rack

Additional cutlery basket for the top

basket *

Upper spray arm

Lower spray arm

Container for special salt with level

indicator *

Filters

Cutlery basket

Lower basket

Locking mechanism

Container for rinse-aid, with level

indicator

Detergent compartment

Nameplate

* not on all models

You will need to purchase the

following before using the

dishwasher for the first time:

– special salt for use in dishwashers

– detergent

– rinse-aid

Only use products, which are suitable for

dishwashers.

Water softener

In order to rinse dishes and glasses

satisfactorily, the dishwasher requires soft

water, i.e. containing little or no lime,

otherwise water stains will be left behind

on crockery and glasses, etc.

If the tap water exceeds a certain level of

hardness, it must be softened, i.e.

decalcified, so that it can be used in the

dishwasher.

This is achieved by adding a special salt

to the water softener inside the

dishwasher.

The water softener, that is the required

amount of salt, is set up according to how

hard the tap water is.

Setting up the water softener

Determine the level of hardness of your

tap water. Your local water company or

service agent can help you with this.

Identify setting from the following water

hardness table.

Hold down the programme button B

and switch on the main switch 1 ,

then release the buttons.

The display 4 flashes and buttons

A and B illuminate.

(Hardness value 2 was set at the

factory).

To change the setting: Press

programme button B .

Each depression of the button

increases the set value by one (0–3).

If buttons

A , B and C illuminate,

the maximum hardness value has been

reached.

If the hardness value is now increased

again, the illuminated buttons go out

and the hardness value is set to 0 (no

buttons illuminated).

Switch off the mains switch 1 .

The set value is stored in the appliance.

Approx. 4 litres of water are required for

regenerating the water softening system.

The overall water consumption per load

can therefore be increased by between 0

and a maximum of 4 litres according to the

water hardness setting.

Water hardness table

_dh _Clarke mmol/

_fH

ABC

0–6

17–21

7–16

22–35

Reset

0–11

30–37

12–29

38–60

0–8

21–26

9–20

27–44

0–1,1

3,0–3,7

1,2–2,9

3,8–6,2

Filling the special salt

container

How the salt works

While washing is taking place, salt is

automatically rinsed out of the salt

container into the water softener where it

dissolves the lime in the water.

The dissolved lime is pumped out of the

dishwasher. The water softening system is

then ready for the next load.

This process of regeneration can only

function when the salt is dissolved in

water.

Unscrew the lid on the salt container 24 .

Before you use the dishwasher for the first

time, pour approx. 1 litre of water into the

salt container.

Use the enclosed salt filler.

Refill with salt (do not use edible salt)

until the salt dispenser is full (max. 1.5 kg).

When the salt dispenser is being refilled,

water is displaced and drains away.

Therefore always refill the salt dispenser

immediately before switching on the

dishwasher (to prevent corrosion). As a

result, the overflowing salt solution will be

immediately diluted and rinsed out. Then

remove salt residue from the filler area and

screw on the dispenser cover, ensuring

that it is not fitted askew.

The LOW SALT indicator 4 on the front

panel will light up initially but will extinguish

again after a short period when the salt

solution has become sufficiently

concentrated.

If the switch is set to ”0”, it is

not necessary to add any salt,

as none is consumed while the

dishwasher is operating. If the

switch is set between ”1” and

”3”, then salt must be added.

Do not pour detergent into the

container for special salt. This

would destroy the water

softener.

Salt refill indicator

As soon as the salt refill indicator 4 is lit

on the control panel, refill with salt

immediately before the next rinse cycle.

Filling the rinse-aid

container

The purpose of a rinse-aid is to prevent

the formation of water marks on tableware

and utensils, and to ensure that glasses

are clean and sparkling. The rinse-aid is

consumed during the washing process.

Fold back the lid on the rinse-aid

container 29 .

To open the lid, press the mark on

the rinse-aid lid and simultaneously lift

the lid off the lug

Pour the rinse-aid into the filler hole

until the level indicator turns dark.

Close the lid, ensuring that you hear it

snap closed.

Note

Use only rinse aid for domestic

dishwashers. Spilt rinse aid

may result in excessive foam

formation in the next rinse

cycle. Therefore, remove any

spilt rinse aid with a cloth.

Adjusting the amount of

rinse-aid

The amount of rinse-aid added to the

water can be varied by adjusting the

stepless control. The rinse-aid control has

been set to ”4” in the factory.

Do not alter the setting of the rinse-aid

control unless streaks (turn knob towards

”–”) or water marks (turn knob towards ”+”)

are left on the dishes.

rinse–aid control

Low rinse-aid indicator

As long as the rinse-aid refill indicator on

the panel 5 (on applicable models) or

dispenser 29 has not illuminated, there is

sufficient rinse-aid in the dishwasher.

LOW RINSE-AID indicator

Unsuitable dishes

You should not clean the

following items in your

dishwasher:

Cutlery and dishes made of wood. They

will leach out and become unsightly; the

utilised adhesives are also not suitable

for the dishwasher temperatures.

Delicate décor glasses, craft dishes and

vases, special antique or irreplaceable

dishes. These décor items are not

dishwasher-safe.

Plastic parts, copper and tin dishes

sensitive to hot water are not suitable

either. Overglazed patterns, aluminium

and silver parts tend to become

discoloured and fade during the rinsing

cycle. Even some types of glass (e.g.

crystal glass objects) may become cloudy

after many rinse cycles. Completely

absorbent materials, such as sponges and

cloths must not be cleaned in the

dishwasher either.

Recommendation:

In future buy only dishes which are

identified as dishwasher-safe.

Note

Dishes which are soiled with

ash, wax, lubricating grease or

ink must not be cleaned in the

dishwasher.

Damage to glassware and other

dishes

Possible causes:

type of glass or manufacturing process

chemical composition of detergent

water temperature and duration of

dishwasher programme.

Suggested remedy:

Use glassware or porcelain dishes that

have been marked ’dishwasher–proof’

by the manufacturer.

Use a mild detergent that is described

as ’kind to dishes’. If necessary, seek

further information from detergent

manufacturers.

Select a programme with as low a

temperature and as short a duration as

possible.

To prevent damage, take glass and

cutlery out of the dishwasher as soon

as possible after the programme has

ended.

Customer Service

Please call your local service agent, if you

are not able to resolve any problem

yourself. The name of your nearest service

agent is shown in the Customer Service

address list. When you call, please provide

details of the model number (1) and the

production (FD) number (2) which are

shown on the nameplate on the appliance

door.

Warning

Please note that a visit by the

customer service technician in

the event of a fault or one of

the problems previously

discussed is not free of charge

even during the warranty

period.

Important information

Notes on waste disposal

Old appliances still have some residual

value. An environment-friendly method of

disposal will ensure that valuable raw

materials can be recovered and used

again.

When an appliance has reached the end

of its working life, unplug it from the mains.

Cut through the mains cable and dispose

of it together with the plug.

Destroy the door locking mechanism.

This will ensure that children at play

cannot become locked inside and are not

exposed to the risk of suffocation.

Your new appliance was protected by

suitable packaging while it was on its way

to you. All materials used for this purpose

are environment-friendly and can be

recycled. Please make a contribution to

protecting the environment by disposing of

the packaging appropriately.

Do not allow children to play with any parts

of the packaging. There is a risk of

suffocation by the cardboard boxes and

the plastic wrapping.

Up-to-date information concerning options

for disposal can be obtained from your

retailer or local municipal administration.

General

Built-under and integrated appliances

which are subsequently installed as

free-standing appliances must be

secured to prevent them from falling

over, e.g. by screwing them to the wall

or by installing them under a continuous

worktop which is screwed to the

adjoining units.

For Swiss version only:

The appliance can be installed without

difficulty between wooden and plastic

walls in a kitchen range. If the appliance

is not connected via a plug, the

installation side must feature an all-pole

disconnector with a contact gap of at

least 3 mm in order to satisfy the

relevant safety regulations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CG562J4 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Constructa CG562J4

Constructa CG562J4 User Manual - German - 26 pages

Constructa CG562J4 User Manual - Dutch - 26 pages

Constructa CG562J4 User Manual - French - 29 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa CG562J4 Manual

Product: