Manual Constructa CF232253 (page 58 of 72) (English, German, Dutch, French)

542390

Zoom out

Zoom in

1/72

Changing the clock

To subsequently change the time, press the KJclock function

button repeatedly until the KJ and 3 symbols light up again.

Change the time with the rotary selector.

Cleaning the appliance

Clean your appliance before using it for the first time.

1. Remove accessories and any remaining packaging from the

cooking compartment.

2. Clean the accessories and cooking compartment with hot

soapy water (see section: Cleaning and care).

3. Heat with % Top/bottom heat at 240°C for 60 minutes.

4. Afterwards, wipe the cooled cooking compartment with hot,

soapy water.

5. Clean the outside of the appliance with a soft, damp cloth

and soapy water.

Operating the appliance

In this section, you will find out how to switch your appliance on

and off, and how to select an operating mode and temperature.

Switching on the appliance

1. Turn the operating mode selector until the desired operating

mode is selected.

2. Turn the temperature selector until the desired temperature is

selected.

The r indicator lamp lights up while the appliance is heating

up and during any subsequent heating.

Switching off the appliance

1. Turn the operating mode selector back to the Û position.

2. Turn the temperature selector back to the Ú position.

After the appliance is switched off, the cooling fan may

continue to run.

Electronic clock

In this section, you can read about

■ how to set the timer

■ how to switch your appliance off automatically (cooking time

and end of operation)

■ how to switch your appliance on and off automatically (preset

operation)

■ how to set the time

Clock display

Notes

■ Between the times ƒƒ:‹‹ and †:†Š the clock display is

dimmed if you do not make any settings in that period or no

clock function is activated.

■ When you set a clock function, the time interval increases

when you set higher values (e.g. cooking time up to‚:‹‹œ to

the minute, using ‚:‹‹œ

to the nearest 5 minutes).

■ For the Q minute minder, x cooking time, y end of

operation and preselection mode clock functions, a signal

sounds when the settings have elapsed and the Q or y

symbol flashes. To cancel the audible signal before it ends,

press the KJ clock function button.

■ Briefly press the KJ clock function button to select a clock

function. You then have 3 seconds to set the selected clock

function. After this time, the setting mode is exited

automatically.

&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU

Clock function Use

Q Minute minder You can use the minute minder as an egg timer or a kitchen timer. The appliance does

not switch on or off automatically

x Cooking time The appliances switches off automatically after a cooking time setting has elapsed

(e.g. ‚:„‹ hours)

y End of operation The appliance switches off automatically at a set time (e.g. ‚ƒ:„‹ o'clock)

Preset operation The appliance switches on and off automatically. Cooking time and end of operation

have been combined.

3 Clock Setting the clock

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CF232253 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Constructa CF232253

Constructa CF232253 User Manual - Italian - 20 pages

Constructa CF232253 User Manual - Polish - 20 pages

Constructa CF232253 User Manual - Portuguese - 20 pages

Constructa CF232253 User Manual - Swedish - 20 pages

Constructa CF232253 User Manual - Turkish - 20 pages

Constructa CF232253 User Manual - Spanish - 20 pages

Constructa CF232253 User Manual - Norwegian - 20 pages

Constructa CF232253 User Manual - Finnish - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa CF232253 Manual

Product: