755458
42
Zoom out
Zoom in
Previous page
1/72
Next page
42
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
cleaning agent with a high alcohol content,
scouring pads,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
Detaching and refitting the rails
The rails can be removed for cleaning. The oven must have
cooled down.
Unhooking the rails
1. Hold the shelf frames from underneath and pull slightly
forward. Pull the extension pins at the bottom of the rails out
of the mounting holes (Fig. A).
2. Then fold the rails upwards and carefully remove them
(Fig. B).
Clean the rails with washing-up liquid and a sponge. For
stubborn deposits of dirt, use a brush.
Installing the frames
1. Insert the two hooks carefully into the upper holes. (Figure A-
B)
The control
panel Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaners or glass
scrapers for cleaning.
Stainless-steel
surfaces
Clean with warm soapy water and a soft cloth.
On stainless-steel surfaces, always wipe par-
allel to the natural grain. Otherwise, you may
scratch the surface. Dry with a soft cloth.
Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately. Do
not use any abrasive materials, scouring
sponges or rough cleaning cloths. The stain-
less-steel fronts can be polished using a spe-
cial care product. Follow the manufacturer's
instructions. You can purchase special stain-
less-steel cleaner from our after-sales service
or from specialist retailers.
Enamel sur-
faces and lac-
quered
surfaces
Wipe with a damp cloth and some washing-up
liquid. Dry with a soft cloth.
Rotary knobs Wipe with a damp cloth and some washing-up
liquid. Dry with a soft cloth.
Glass panel Clean using glass cleaner. Do not use any
abrasive cleaning agents or sharp metal
objects. These could scratch and damage the
surface of the glass panel.
Seal Wipe with a damp cloth. Dry with a soft cloth.
Oven interior Warm soapy water or a vinegar solution. If
there are heavy deposits of dirt, only use oven
cleaner on cold surfaces.
Glass cover
for the oven
light
Wipe with a damp cloth and some washing-up
liquid. Dry with a soft cloth.
Accessories Soak in warm soapy water. Clean with a brush
or sponge.
Aluminium
baking tray
(optional)
Do not clean in the dishwasher. Never use
oven cleaner. To avoid scratches, never touch
the metal surfaces with a knife or a similar
sharp object. Clean horizontally with some
washing-up liquid and a damp glass cleaning
cloth or a microfibre cloth – do not press too
hard. Dry with a soft cloth. Do not use any
abrasive materials, scouring sponges or
rough cleaning cloths. Otherwise, you may
scratch the surface
Childproof
lock (optional)
If a childproof lock has been fitted on the
oven door, it must be removed before clean-
ing. Soak all plastic parts in warm soapy
water and wash with a sponge. Dry with a soft
cloth. If very dirty, the childproof lock will not
work properly.
Hob Refer to the hob instruction manual for infor-
mation about care and cleaning.
%$
%$
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa CF030250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CF030250 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info