331168
48
Zoom out
Zoom in
Previous page
1/60
Next page
48
Electronic clock
In this section, you can read about
how to set the timer
how to switch off your appliance automatically
how to switch your appliance on and off automatically
(preset operation)
how to set the time
Clock display
Notes
When you set a clock function, the time interval increases
when you set higher values (e.g. cooking time up to:‹‹œ to
the minute, using :‹‹œ to the nearest 5 minutes).
Between ƒƒ:‹‹ and :†Š the clock display is darkened if
you do not alter any settings during this time or if no clock
function is activated.
For the Q minute minder, x cooking time, y end of
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the Q or y
symbol flashes. To cancel the audible signal early, press the
clock function button.
Switching the clock display on and off
1. Press and hold the clock function button for 6 seconds.
The clock display switches off. If a clock function is active,
the associated symbol remains lit.
2. Press the clock function button briefly.
The clock display switches on.
Minute minder
1. Press the clock function button repeatedly until the KJ
and Q symbols light up.
2. Set the duration using the rotary selector (e.g. :‹‹ minutes).
The setting is applied automatically. Then the time is
displayed again and the timer starts counting down.
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
1. Set the operating mode and temperature.
The appliance heats up.
2. Press the clock function button until the KJ and x symbols
light up.
3. Set the cooking time with the rotary selector
(e.g. :„‹ hours).
The setting is applied automatically. Then the clock is
displayed again and the set cooking time starts counting
down.
Once the cooking time has elapsed, the appliance switches off
automatically.
1. Turn the operating mode selector back to the Û position.
2. Press the clock function button to exit the clock function.
Clock function button Rotar
y
selector
Clock function Use
Q Minute minder You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
x Cooking time The appliances switches off automatically after a cooking time setting has elapsed
(e.g. :„‹ hours)
y End of operation The appliance switches off automatically at a set time (e.g. ‚ƒ:„‹ o'clock)
Preset operation The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
3 Clock Setting the clock
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa cf 132550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa cf 132550 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info