715171

Constructa CD689860 Manual

20
Zoom out
Zoom in
Previous page
1/60
Next page
20
Cleaning and maintenance
Cleaning and mai nt enance
: Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
: Risk of electric shock!
Penetrating moisture may result in an electric shock. Clean the
appliance using a damp cloth only. Before cleaning, pull out the
mains plug or switch off the circuit breaker in the fuse box.
: Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
: Risk of injury!
Components inside the appliance may have sharp edges. Wear
protective gloves.
: Risk of injury!
Risk of trapping body parts when opening and closing the
glass front. Do not reach into the area behind the glass panel,
and keep your fingers away from the hinges.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning product, follow the instructions in the table.
Do not use any of the following:
■ Harsh or abrasive cleaning agents, e.g. scouring powder or
liquid scouring cleaner,
■ Cleaning products with a high alcohol content,
■ Hard scouring pads or cleaning sponges,
■ Pressure washers or steam cleaners,
■ Cleaning products that dissolve limescale,
■ Aggressive all-purpose cleaning products,
■ Oven spray.
Note: Wash new sponge cloths thoroughly before use.
Note: Follow all instructions and warnings included with the
cleaning products.
--------
Removing metal grease filter
1. Open the glass front slowly and fully. Hold the glass front in
the centre when doing so, gripping it firmly.
2. Open the lock and swing down the metal grease filter. When
you do this, take hold of the metal grease filter from
underneath with your other hand.
3. Take the metal grease filter out of the holder.
Notes
■ Fat may accumulate in the bottom of the metal grease filter.
■ Hold the metal grease filter level to prevent grease from
dripping out.
Area Cleaning products
Stainless steel Hot soapy water:
Clean with a dish cloth and then dry with
a soft cloth.
Clean stainless steel surfaces in the
direction of the grain only.
Special stainless steel cleaning prod-
ucts are available from our after-sales
service or from specialist retailers.Apply
a very thin layer of the cleaning product
with a soft cloth.
Painted surfaces Hot soapy water:
Clean using a damp dish cloth and then
dry with a soft cloth.
Do not use stainless steel cleaner.
Aluminium and
plastic
Hot soapy water:
Clean with a soft cloth.
Glass Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Controls Hot soapy water:
Clean using a damp dish cloth and then
dry with a soft cloth.
Risk of electric shock caused by pene-
trating moisture.
Risk of damage to the electronics
caused by penetrating moisture. Never
clean controls with a wet cloth.
Do not use stainless steel cleaner.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa CD689860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CD689860 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info