Manual Constructa CD639350 (page 20 of 44) (English, German, Dutch, French)

511363

Zoom out

Zoom in

1/44

Checking the wall

■ The wall must be level, vertical and adequately load-bearing.

■ The depth of the bore holes must be the same length as the

screws. The wall plugs must have a secure grip.

■ The enclosed screws and wall plugs are suitable for solid

brickwork. Suitable fasteners must be used for other

structures (e.g. plasterboard, porous concrete, poroton

bricks).

■ The max. weight of the extractor hood is 40 kg.

Electrical connection

: Risk of electric shock!

Components inside the appliance may have sharp edges.

These may damage the connecting cable. Do not kink or pinch

the connecting cable during installation.

The required connection data can be found on the rating plate

inside the appliance; to do this, remove the metal mesh grease

filter.

Length of the cable: approx. 1.30 m

This appliance complies with the EC interference suppression

regulations.

This appliance may be connected to a correctly installed

earthed socket only.

Attach the earthed socket preferably inside the flue duct.

■ The earthed socket should be connected via its own circuit.

■ If the earthed socket is no longer accessible following

installation of the appliance, a disconnecter must be fitted as

for a permanent connection.

If a permanent connection is required, the installation must

feature an all-pole disconnecter (circuit breakers, fuses and

contactors) with a min. 3 mm contact opening. The permanent

connection may be installed by an electrician only.

Installation

Preparing for installation

Caution!

Ensure that there are no electric wires, gas or water pipes in the

area where holes are to be made.

1.Mark a vertical centre line on the wall from the ceiling to the

lower edge of the extractor hood.

2.Mark the positions for the screws and the contour of the

attachment area.

3.Drill 8 mm Ø holes to a depth of 80 mm and press the wall

plugs flush with the wall. ¨

4.Screw on the fixing bracket for the flue duct. ©

5.Screw in 2 securing screws with washers to approx. 5 mm. ª

Installation

1.Attaching and aligning the appliance. ¨

2.Mark the hole for the safety screw. ©

3.Remove the appliance once more. ª







[







 

! !

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CD639350 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa CD639350 Manual

Product: